Disco-Ron Posted December 13, 2014 Share Posted December 13, 2014 I need to source the bushes and bolts for a puma..... I kinda assume that the arms are the same as the older ones,but the bolts are smaller hence the Bush must be different too.... Thanks Quote Link to comment Share on other sites More sharing options...
western Posted December 13, 2014 Share Posted December 13, 2014 rear trailing arms to axle & chassis http://lrcat.com/#30/4/44804 rear A frame arms to axle & chassis http://lrcat.com/30/4/44807 front radius arms to axle & chassis & panhard rod to axle & chassis http://lrcat.com/30/3/8352#30/4/44790 Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted December 13, 2014 Author Share Posted December 13, 2014 Thanks Ralph, but the puma doesn't have the cast metal lumps that bolt to the chassis, they have welded on pieces that the big bolts go through, however the bolts are smaller hence the Bush must be different too...... I think it's a post 09 thing..... Quote Link to comment Share on other sites More sharing options...
western Posted December 13, 2014 Share Posted December 13, 2014 look at item 3 in the A frame link above. there are 2 part numbers, the ANR4164 is for 2009 on vehicles http://www.lrseries.com/shop/product/listing/2996/ANR4164-REAR-TOP-LINK-BUSH.html has a M16 x 100mm bolt to fit to chassis brackets bolt RYG501550 now ANR5804 http://www.lrseries.com/shop/product/listing/11853/ANR5804-BOLT-M16-X-100.html?search=RYG501550&page=1 Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted December 14, 2014 Author Share Posted December 14, 2014 Excellent Ralph. You're a star! ! Quote Link to comment Share on other sites More sharing options...
western Posted December 14, 2014 Share Posted December 14, 2014 Your welcome. Quote Link to comment Share on other sites More sharing options...
92a Posted December 26, 2020 Share Posted December 26, 2020 Sorry to re-open an old post but I have got a wolf 90 chassis ( minus it's A frame ) and assumed these parts would be the same as all the other early vehicles but the usual 3/4 unf bolts are too big for the holes in the chassis , no crow's feet on this one , and I wondered if anyone knows if the later Puma bolts / parts might fit the XD wolf chassis and if ANR4164 will fit an earlier A frame? Thanks in advance, Angus Quote Link to comment Share on other sites More sharing options...
western Posted December 26, 2020 Share Posted December 26, 2020 Are there welded on A frame brackets on bottom of the big crossmember, if yes you need the Tdci parts, if No then you need the forged crowfoot brackets & fixings as well for the pre Tdci parts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.