Feeney4 Posted February 27, 2016 Share Posted February 27, 2016 Trying to bleed the clutch on a td4 after concentric slave cylnder replacement but the pedal will only come up about 2 inches off the floor when connected to the master cylinder but will come all the way up when disconnected from the master cylinder, have tried a different master but is still the same, any help appreciated Quote Link to comment Share on other sites More sharing options...
Lazlo52 Posted April 20, 2016 Share Posted April 20, 2016 I had a new flywheel and clutch fitted to my td4 last year. I also had fitted a clutch master cylinder but it was a sealed unit and can not be bled. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.