jcbdiggers Posted May 18, 2015 Share Posted May 18, 2015 A bit of back round to what I have done.I have taken my 2003 1.8 petrol freelander and a got a donor TD4 freelander (which was running) and swapped every over (wiring loom, ecu, ews, body control module, dash, ect ect)First problem I had was temp gauge was on full. but it still started. I had never run it for long as it was not finished. No radiator in it ect. After I finished it ran it for 5 minuets and I stopped it. It never started again. It turns over but will not start. Checked pumps and fuel pressure ect which were all fine. Plugged computer in and it came up with Immobiliser Fault.It just seams very strange that it ran and now it doesn'tCan anybody shed some light on this? Quote Link to comment Share on other sites More sharing options...
L19MUD Posted May 21, 2015 Share Posted May 21, 2015 Probably a silly question - but why did you do all of that?! Are you using the TD4 key fob? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.