oneandtwo Posted September 30, 2014 Share Posted September 30, 2014 I'm need to replace this bracket on two of my 300tdi's. It bolts to the RH bulkhead to chassis bracket, and supports the air intake pipe work. The photo shows on but the end has rusted away which bolts to the bulkhead bracket. Any ideas on part number, I've looked but can't see it on any parts diagrams. I also need the two clips that retain the power steering pipes to the front chassis crossmember. I've ordered these in the past but always get the wrong ones - I've been supplied with the 200tdi type which is like a douple P clip, and also another type which was almost right but seemed to be made for one pipe being much larger than the other. Thanks! Quote Link to comment Share on other sites More sharing options...
western Posted September 30, 2014 Share Posted September 30, 2014 PAS pipe clips in http://lrcat.com/#31/4/53706 items 4,7,8. possibly this version http://www.brit-car.co.uk/product.php/126719/0/pas_pipes_twin_retaining_clip___defender no idea on the other part your after, can't find a support like it in the parts info I have use of. Quote Link to comment Share on other sites More sharing options...
oneandtwo Posted September 30, 2014 Author Share Posted September 30, 2014 Thanks, none of the pas clips in that diagram but further research I think they are ntc 9208. All three of my 300tdis have that bracket to hold the intake but I've never found what part number is - two of them are totally rotten Quote Link to comment Share on other sites More sharing options...
k2sul Posted October 25, 2015 Share Posted October 25, 2015 A bit late perhaps, but may be useful for anyone else searching for the same info http://www.yrm-metal-solutions.co.uk/Land-Rover-Defender-Bulkhead-to-Chassis-Bracket-Air-In-Take-Bracket-300tdi/Td5-Galvanised The part is Air In Take Dump Valve Bracket for 300tdi & Td5 Part no. ESR3162 Quote Link to comment Share on other sites More sharing options...
western Posted October 25, 2015 Share Posted October 25, 2015 that'll be this part --- the bracket is not listed sepeately by LR http://www.brit-car.co.uk/product.php/114786/5497/valve_and_bracket_assy_td5_def Quote Link to comment Share on other sites More sharing options...
western Posted November 5, 2015 Share Posted November 5, 2015 don't know if you still need this -------------- found this galvanised one on ebay, from a seller I have dealt with recently. http://www.ebay.co.uk/itm/Land-Rover-Defender-Air-In-Take-Dump-Valve-Bracket-300tdi-Td5-Galvanised-ESR3162-/181782432057 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.