Taffia Posted October 24, 2014 Share Posted October 24, 2014 Hi, I finally managed to get a new set of seats for my Military 110 from the recent Newbury meet - no more plastic cushions for me - I now have a set of Techno Defender seats with Heating - feel like a Range Rover Owner - if I can every work out how to connect them - that's another job. I am about to fit the seats and I noticed I only have one of the plastic plugs/guides that the two pins on the back of the seat bases slide into. Pic below. I would really appreciate if anyone could tell me the part number/what it is to buy another three - and also where you found it please so I can avoid such posts - I have searched oh yes but still learning the dark art of "Part Number Sourcing" Thanks Taffia. Quote Link to comment Share on other sites More sharing options...
Buzza Posted October 24, 2014 Share Posted October 24, 2014 Its MXC 5212, brit-car.co.uk have a picture of it. Listed for centre seat but fits outer ones as well. Steve Quote Link to comment Share on other sites More sharing options...
western Posted October 24, 2014 Share Posted October 24, 2014 to confirm the above, see item 21 in http://lrcat.com/#31/4/53659 the brit-car link http://www.brit-car.co.uk/product.php/98138/3947/centre_seat_location_plate_def Quote Link to comment Share on other sites More sharing options...
PaulMc Posted October 24, 2014 Share Posted October 24, 2014 Hi,I finally managed to get a new set of seats for my Military 110 from the recent Newbury meet - no more plastic cushions for me - I now have a set of Techno Defender seats with Heating - feel like a Range Rover Owner - if I can every work out how to connect them - that's another job. I am about to fit the seats and I noticed I only have one of the plastic plugs/guides that the two pins on the back of the seat bases slide into. Pic below. I would really appreciate if anyone could tell me the part number/what it is to buy another three - and also where you found it please so I can avoid such posts - I have searched oh yes but still learning the dark art of "Part Number Sourcing" Thanks Taffia. If they have the factory connectors on the seat 'tails' - Then, I can help with seatbox connectors and other bits . Quote Link to comment Share on other sites More sharing options...
Taffia Posted October 25, 2014 Author Share Posted October 25, 2014 Its MXC 5212, brit-car.co.uk have a picture of it. Listed for centre seat but fits outer ones as well. Steve to confirm the above, see item 21 in http://lrcat.com/#31/4/53659 the brit-car link http://www.brit-car.co.uk/product.php/98138/3947/centre_seat_location_plate_def Dear buzza/Western - many thanks - it was the lrcat link I was missing - the other parts catalogue don't have this bit on - will keep it safe Off to purchase 1 Quote Link to comment Share on other sites More sharing options...
Taffia Posted October 25, 2014 Author Share Posted October 25, 2014 If they have the factory connectors on the seat 'tails' - Then, I can help with seatbox connectors and other bits . Yes please!!!!!!! Quote Link to comment Share on other sites More sharing options...
PaulMc Posted October 25, 2014 Share Posted October 25, 2014 Yes please!!!!!!! I have the seatbox male connectors, with terminals and wire seals (not pictured) at £11.95 for a pair of connectors - I also have two types of panel clip - both at £1.25 each The Black type is for clipping into a ¼" hole - The Translucent type is for 2002 TD5/Puma seatboxes, which already have an oblong hole punched into the panel. These go in at an angle and twist to square, to lock them in place - Panel clips shown fitted to the male connector - I also have the proper seatbox grommets (269257) that fit into the existing 25mm hole in the 2002 TD5/Puma seatboxes, at £1.50 each - Crimping the sealed MQS terminals isn't easy without the proper crimping tool. The crimped male terminal and seal look like this (the Green arrow is pointing at the terminal latch) - If you wanted, I can supply the connectors crimped and assembled to the correct colour cables, over-sleeved with un-split convoluted tubing, to whatever length you require - PM me . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.