skauldy Posted June 29, 2016 Share Posted June 29, 2016 Hi Guys Has anyone the part number for a gems 4.6 sump gasket. On my second gasket and no luck fitting wise. Shane Quote Link to comment Share on other sites More sharing options...
western Posted June 29, 2016 Share Posted June 29, 2016 LVF100400 item 16 in http://www.allbrit.de/UNI.cfm?PAGE=824285&SPRACHE=EN click the + to see part number Quote Link to comment Share on other sites More sharing options...
skauldy Posted June 29, 2016 Author Share Posted June 29, 2016 That's the last one I tried. It had a good few extra holes that lined up with nothing plus rubber bits sticking out of it again lined up with nothing and wouldn't let it sit flat. Didn't look right at all. Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted June 30, 2016 Share Posted June 30, 2016 I was advised when rebuilding my 4.6 gems that it's better to run a bead of RTV instead of a gasket then once the sumps on and it sets run a sharp blade round to cut the bits that squeeze out. Quote Link to comment Share on other sites More sharing options...
skauldy Posted June 30, 2016 Author Share Posted June 30, 2016 Searched microcat again today and nothing. Think I'll go the RTV route as you say. Need to get a move on with the build. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.