The project90:
from this:

And a couple of years later,after getting the chassis galvanised and spending ALL my wages each month on parts,to:

project90-2:
from (no scanned in digi picture yet! buy it was a brand new plain green 200Tdi 90 hard top back in 1992 when i collected it from T H Whites!)
something like:

(not the exact vehicle, but it was just a plain green 90 hard top)
After several years of
heavy abuse, it looked like this:

with a 3.9 EFI V8, santana gearbox, 9.00x16 tyres, a homemade cage and tons of dents and rust!
I then started to build the project90 above (the Q plate one) and this V8 90 fell into disrepair. I used it for cannibalising bits off, until i decided a) that i wanted to take my numberplate off of it and transfer it, and

i might as well rebuid it! my hand was forced, because to transfer a plate you need an MoT, i
could have had a friendly word with my local MoT inspector and taken a "different" 90 there, but figured i might as well just rebuild it anyway! i like doing these projects so what the hell!!
so, a stripdown, wire brush and lots of hammerite later, we have a rolling chassis:

and several months later, some bodywork and gearbox in place:

It's getting there!!

just got to fit the engine, some doors, paint the rear roll bar, fit new wheels, lots of T-cut and maybe a respray and she'll be done!
My 110 is just a plain Td5 110 CSW with a few bits i've bolted on (for now)... i can't go too mad with it as it's my "company" car, not mine, but as i work for my parents i have a slight free hand:

However, if you see it at the moment, everything has been removed.... the joy of working for your parents and falling out with them! (i removed the stuff of my own accord, as i don't "trust" them....

)