Jump to content

squi5566

New Faces
  • Posts

    4
  • Joined

  • Last visited

Reputation

0 Neutral
  1. hi, whats the best oil for a 184000 mile 200tdi, the usual stuff or something a bit thicker.thanks folks
  2. Hello all, i recently picked up a range rover 200tdi factory original, been standing 2 years, its a 1993, needs some tlc, but everything works, and every little part is on it, and its started so easy, and clean, has 184000 miles, thing is,i got under it and noticed the front prop was missing, i bought it without seeing first, didnt have time. anyway can anyone tell me which is the right prop to buy for it, nothing on the web, makes it very clear, a friend gave me one from a 92 petrol se, would that be the same, as the the one that should be on it, length is the same, from the flange to flange, also while im here, if you grab the flange on the rear diff, vehicle on ground, prop off, ive got about 2inches of knocking free play (backlash is it)?, is that too much?? and can it be adjusted, or should i just get another diff, thanks in advance for advice.
  3. hi, in detail if possible, can some one tell me or show me how to install a 300tdi fuse box into a 200 tdi rrc(1993 to be exact), ive cut out all the old crappy fuse links, and now have two bunches of wires, 1 from the range rover side and 1 from the 300tdi fuse box, which wires connect to which wire or fuse, all the 200tdi wires are orange and another colour, all the fuse box wires are brown and another colour, some fuses i need and some i dont, i have no diagrams to follow, and not much else, and id prefer not to set my car on fire, if possible, so can someone assist me please, many thanks in advance.
  4. hello folks, i need help fitting a discovery 300tdi fuse box into a range rover 200tdi, i cant figure out which wires on the 200 tdi, ( all orange and some thing),go, to which fuses and wires, on the 300tdi fuse box, ( all brown and something, i have no wiring diagrams, im good at mechanics but dont have much patience for electrics. ive cut out all the old fusible links, ive figured out that i dont need abs pump, fuel injection, air con, etc. a diagram for dummies would help me out, which wire to where, easy?, ive seen on some forums others have done it, and only leave fotos of the newly installed fuse box, all shiny and sitting proud, like some stupid football trophy, on a shelf, and nothing to help others do the same upgrade, any help appreciated, please stick to the topic, many thanks in advance.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy