ches

found these in an old workshop manual don't know if any use?

Ebay

don't know if this is any help? springs.pdf

when using Nanocom 1 it is advised that after each diagnostic session that the alarm is armed and then disarmed before checking that changes have been made. May be worth a try with your kit?

Spider

Tools.

sure it's oil and not deisel? common leak from that area is from the FPR, assuming you mean 'drivers' side. worth a read of this walkthru' if it is http://www.discovery2.co.uk/Fpr.html

I think the ECU you have is for a manual and should be NNN500030

worth a read. http://www.landroverclub.net/Club/HTML/Wheel_wobble_cure.htm

Rave.

have a look here. seems to be a common problem. http://www.landyworld.co.uk/discowindows.htm

this is a must read for the front hubs http://www.discovery2.co.uk/fronthub.html

the exploded views on Microcat online may help http://lrparts.ru/engl/

what MY is the 200?

no ecu for the rear windows on disco 2. operated by the BCU/IDM and a lift relay. check fuse 13 in the passenger fusebox