nitrotom93

Hi, just bought myself a defender which is a bit of a project... one of the things I need to do is get the drivers door to line up, I’ve replaced the hinges but it looks like the bulkhead angle is out on one side, how do I add spacers to align it with stripping the bare minimum? I take it if I undo the bolt the bulkhead will drop or move? Thanks!

thanks alot, cant find where to log in on landywatch but someone has already posted it so thank you! Been checking CCTV and it was stolen around 11 yesterday morning being towed by a white van, cant see a number plate so asking in other places that have cameras near by. Thanks for everyones help Tom

Not sure if this is in the right place.. Stolen off Naylor Street which is just off vauxhall road, just outside my student halls. Last time i definitely saw it was on monday night at 11, cant remember seeing it yesterday, but didnt notice anything unusual like i did this morning. There was no smashed glass around and it was alarmed and immobilised. If anyone in the area could keep the eye out it would be great Thanks Tom

Thanks for all the info! I'll have a look in to it, not managed to check the bolt today as I've been ill, it will have to wait for Friday! Thanks Tom

ill double check its tight tomorrow, will i definitely need the new diff? im pretty sure the diff itself is in ok condition so would rather not have to get a new one of them! Might have to come home a few weekends then to fix it Thanks

Hi, A few weeks ago replaced the cv joints on my defender, whilst i had the front stripped down i decided to replace the front diff pan as it looked as if it was going to go bad soon ( the rear one already has) so i removed the diff, after rebuilding the front axle i had quite a bad leak from the diff, thought this might be due to poor welding however i also had a whine coming from the front after rebuilding, i thought this could have been the prop as i could feel play in it. Ive just replaced the prop and can still feel the play so it must be the pinion bearing causing the up and down movement, this would also explain the leak of oil as it does look like it might be running from the pinion seal. Is it possible to replacing the bearing with the diff still in place? I dont have the time at the minute to strip it back down due to uni! Ive spoke to the garage i normally take it too on the phone and he reckons that these parts dont wear out and it would need a new diff... he quoted £220 for a 2nd hand diff and £175 to fit it, is this true? and are his prices expensive? Ive tried searching the forum but cant find many posts on this! Thanks! Tom

All sounds very helpful, thanks! ill look into the insurance for just fire and theft, i forgot about insurance for if it was stolen! I did speak to my dad about insuring it for a a very low milage per year so he drive it around a bit, trouble is he is a civil engineer, so drives for usually an hour or 2 at least a day so its too unreliable for him! I also looked at seeing if i could get insurance, short term for like a week for when im home so i could still drive it but being 18 thats proving quite hard. would you recommend getting a cover? would it help? Thank you!

Hi everyone, So im off to uni tomorrow so my car is going to be parked on the drive for about a year as it probably wont be insured. Going to get my dad to start it quite often but is there anything else you recommend me doing to it before i leave as it will be sat for so long? Was also thinking of getting a cover for it, to protect it through those cold winter months! Thanks!

ok, its not the vent flap or the bulkhead to screen seal as I've already had the gutter sealant out on this and a can't see any runs coming down from it, i will check the spindle seals in the morning. Thanks

Also i forgot to add, I can see water running off the motor i can't tell where its coming from.. looks like from inside it! where could this be coming from?

Hi, it was just hanging off the wiper tube so that is a possibility, i will try that thank you

Ive had all my dash off and when I've put the wiper motor back in the wipers don't seem to be going fully up to the right and stopping right in my line of sight, i replaced the park switch last year so don't think it will be that. Thanks

Been out today with the gutter sealant trying to reduce the leaks after seeing it was all still coming in but surprisingly not through the big hole! Think most of its coming through the seal between the window mount and the bulkhead, didn't realise there was a seal there as it had been painted over! Also had the hammerite out on the rust to try and stop it spreading. Sounds like this rattlematt is worth getting then, ill add it to the list!

Bit out my price range that! Although looking at it in different sizes its much more reasonable so I'm guessing thats just an error. Did it make much of a difference? And is that how much you needed to do it all?

Well the whole dash is already stripped, and looking very dirty behind there... Whilst its all off I thought it might be a good idea to sound proof behind the dash as its much louder with no dash! ( I suppose the hole isn't really helping!) has anyone done this? I problem I can see of it needs to be very thin so the dash still fits properly. Going to attempt to weld on Monday now I think