LZ5UL Posted January 16, 2009 Share Posted January 16, 2009 Hi Does anybody know what is the difference between "sdt X" & "std Y" ? The assembly is sold by the ****ddock shops and some others, but no additional info... This will be my first 200TDi rebulding, so I expect a lot of surprises Quote Link to comment Share on other sites More sharing options...
MECCANO Posted January 16, 2009 Share Posted January 16, 2009 Hi Does anybody know what is the difference between "sdt X" & "std Y" ? The assembly is sold by the ****ddock shops and some others, but no additional info... This will be my first 200TDi rebulding, so I expect a lot of surprises I can't remember off hand but i know its all explained in the land rover manual. Quote Link to comment Share on other sites More sharing options...
western Posted January 16, 2009 Share Posted January 16, 2009 200Tdi piston/conrod/rings parts page says --- Grade X piston is for cylinder bore diameter of 90.487mm to 90.475mm [pistons must be changed as a set of 4] grade X piston part number ERR1390 Grade Y ----------------------------------------------- 90.500mm to 90.487mm -------------------------------------------------- grade Y ------------------------- ERR1391 hth Quote Link to comment Share on other sites More sharing options...
LZ5UL Posted January 16, 2009 Author Share Posted January 16, 2009 Thanks a lot! Bow down to you western! Wish you all the best...to you and your family, friends, vehicles and so on... I knew I can count on you mates Quote Link to comment Share on other sites More sharing options...
western Posted January 16, 2009 Share Posted January 16, 2009 happy to share the info if I've got it, we are all trying to keep our trucks going well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.