tweetyduck Posted August 21, 2013 Share Posted August 21, 2013 Hi, as some of you know I've just had to replace my front Crankshaft oil seal. ERR4575 I was also changing the crank pulley and idlers etc. as I had a kit. So once I got the old seal out I had no tools to put in the new seal and swinging a soft face hammer about near the rad wasn't a good idea. The picture I'm attaching shows how I pushed in the seal using the old seal and the two pulleys (one old and one new) It pushes in nice and square and its quick and easy. Hope that helps someone out..... Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted August 21, 2013 Share Posted August 21, 2013 Very cunning! Nice one Quote Link to comment Share on other sites More sharing options...
Maverik Posted August 22, 2013 Share Posted August 22, 2013 Very very cunning, well done Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.