dicsosfa

Thanks again western

hi after the part number for the rear cross member exhaust bracket for a 90 can find one for 110/130 but not a 90 ? thanks Roy

hi thinking of changing the colour of my 90 which is blue at the moment and i have seen this one can i do the prep myself and the best method of doing it , whats involved ie time, cost, whats needed and the final cost of a respray ? and most important what is the colour ? and yes its orange lol thanks Roy

Hi my son wants a tow bar on his 1986 landrover 90 , wil a 200 or a 300 fit if not what will he need and the part numbers for it thanks Roy

Hi Try this http://www.numcat.ru/landrover/p/31/52566/ Roy

Hi Have done a rear crossmember replacement on my 300 tdi 90 I just need the u shaped plastic clips that hold the wiring to the rear crossmember to both sides as I only managed to remove I've intact Thanks Roy

Thanks for that bolts purchased now Roy

hi going to replace my crossmember on tuesday, so i am just going to cut the towbar bolts and the 2 bolts on either end of the crossmember to tub got the three centre ones undone as they have captive nuts. so i need sizes of nuts and bolts for the tow bar plate on to rear crossmember x4 / towbar bracing legs from tow bar to chassis x 4 and the 2 that go up into the bottom of the crossmember, have got new towball with a free bolts from a mate Thanks Roy

hi found out its just under 25kgs and have got a pricee of £30 cash it will need to have the black spray paint removed first found someone to do it for £15 also he can do any parts that you can get to him he's done a few series 1 and 2 bulkheads in the past and he will drop it of at the galvanisers on the same day, so all sandblasted and galvanised for £45 a bargain i think .. i will have it galvanised upto the extensions so no need to grind before welding. Roy

Hi they want to know its weight cause they charge by the kilo , will grind galvanising off,weld it on then wax oil the inside only galvanising it as I want it to last and I can't afford a full new galvanised chassis at the mo lol

hi going to replace my rear crossmember very soon and want to know how heavy the new one will be as i am going to get it galvanised but they can not give me a price without knowing the weight, i think it maybe a good investment in the long run. so does anyone have a rear crossmember with extentions that they can stick on some bathroom scales or had one delivered and have packing with weight on the label and let me know how much it weighs and yes its a strange request lol lol lol

hi will a injector pump from a 200/300tdi disco fit a 200tdi defender as a mates is giving up the ghost and he does not have the internet at the moment to search for himself,, if so is it a straight swap or will it have to be adapted thanks Roy

hi, popped in to see a friend 0n saturday and whilst going for a spin with him ,i pulled up at some traffic lights and he said he could her the turbo whistling i said he is hearing things but upon checking it out on his drive he was right even on little more than tick over the turbo is merrily whistling away . so question is this a stuck actuator, if so how do i test it ? if so can it be freed in situ or will it have to come off and how hard is it to do ? i am not down on power or getting a lot of smoke. thanks Roy

hi towed my trailer today and noticed that the trailer warning light only flashed once with the indicators, but the trailer lights all work as they should is there a relay if so where ? second thing is i notice that with or without trailer connected if i use the hazzards only the trailer warning light flashes and not the arrows any idea's thanks Roy

hi just wondered if LR fitted a square dash clock i think only on the early 90's is this true as a mate seems to think they did and wants one for his 90 any idea's or maybe a part number thanks Roy