garymorris
-
Posts
362 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by garymorris
-
-
Ryck
Glad you got hold of Paul , I'm sure he'll be able to help you
Gary
-
Try sending Paul Humphries a PM as he's involved with crag and is clued up as to what's going on with the wayfarer
Cheers
Gary
-
?
I have never seen ARB spacers, where are these available from
Hello
Could you make a spacer out of some 50mm box with some holes straight through (with some flat plate or tube to strengthen box)
Gary
-
my mate has just bought some BFG mud terrains off a dealer in belgium (might be Holland) on ebay delivered within a couple of days ,I'll ask him for a phone no or link tomorrow if he's at the workshop
Gary
-
What he ^^^^ said , I'd give Gwyn a ring if I were you and tell him what you're looking to do with the vehicle etc and he'll sort you out with what you want/need
.I have his suspension kit fitted to my 110 and it's spot on
Cheers
Gary
-
Chris
I would do as Gwyn suggests if I were you ,straight away before you break another shocker
I have one of his suspension kits and haven't had any problems
Gary
-
Or just some old rims and no tyres at all?
I had to get to get my 110 out of the garage after rebuilding it by letting the tyres down on the back and removing th tyres on the front
if anybody had seen me reversing out the garage they would have been chuckling I reckon 
Gary
-
All the best for 2011 everybody
-
merry christmas everybody
-
Thanks for the help all. clicky link doesnt seem to work though
DOH
sorry about that , give it a whirl now it should work Gary
-
-
Nice set, found that online for £156, but the more choice I get the more I struggle....
How does the Tend set compare to Halfords professional?
the Teng set is very handy because it's got the pliers ,snips,mole grips etc ,etc and also it's got some AF sockets and spanners which again is very handy . It's really useful to carry as a tool kit in your landy or if you're doing a job outside where you don't want to cart a big toolbox around .
The Halfords set is also very good IMHO , so I suppose it depends what you are after ?
Of course you know the easily solution is to buy both
after all it is christmas 
Cheers
Gary
-
I was looking for a tool kit to keep in my 110. I used to gave a cheap Draper set with 3/8" sockets and a selection of spanners in useful sizes - but none of the junk like subminature 5 lobe torx tips that most sets use to make up the total number of tools. I bought it perhaps 20 years ago - but lost it a few years ago when my 90 caught fire!
It seems that these days it's hard to find combination sets that are not huge and contain 50% junk tools! Any ideas?
Si
Si
I have this set in my 110 and to be fair I think it's spot on , It's handy having AF size spanners&sockets aswell as metric ideal for working on something with the green oval on
Cheers
Gary
-
Hi
I've got a 16' ifor williams twin axle with wheels below bed , and would not change to tri axle like Phil says you can carry less because gross weight is still 3500kgs and you've got six tyres wearing out instead of four.
would imagine the tyres scrub like a bar steward if you're turning round in a tight space
Just my two penneth
Gary
-
I've got one of the Halfords sets normally on offer for £99 have also got a couple of Teng sets cos as we all know you can never have enough tools
-
Hi
if theres no buy it now option give Gwyn a ring, He's a very tidy chap and very very helpful and luckily for me just up the road
Cheers
Gary
-
somebody on here has got some fitted to a range rover.
I looked at buying some a little while ago with the intention of grafting the drop boxes onto the end of series axles.
I couldn't buy the axles cheap enough to justify the experiment.
try doing a search for simca portal?
I'll give the search a whirl , are you still after some axles ?
Gary
-
Thank goodness for that
somebody only mentioned that they maybe different when I'd got the pump fitted,timing belt on,timing cover on and water pump etc fitted Cheers
Gary
-
Yes was thinking simca axles , just wondered about them as i've never heard anybody say they've fitted them to a land rover and wondered why
Cheers
Gary
-
Hi
I would recommend Richards Chassis , I bought a 110 chassis off them earlier this year and there service was good and they seem to have a pretty good reputation.
I'm fairly sure that Marsland chassis are made like the original chassis , two pressings welded together down the centre , where as Richards are fabricated out of four plates welded together
Cheers
Gary
-
hello
has anybody ever fitted sumb portal axles to a land rover ? I should think that there very similar /the same as mog 404 axles ?
Cheers
Gary
-
slightly different & IIRC the 300Tdi FIP has slightly higher working pressures.
Thanks for your reply Ralph , do you think it will work then ? or are the pressures hugely different ?
Cheers
Gary
-
hello
right i'm in the process of rebuilding a 300 tdi engine and have taken off the old edc pump as I want to get rid of any electronic wizardry
I've fitted a 200 tdi pump off a friend but somebody mention today that they may be different
something about pressures So is a 300 tdi injector pump the same as a 200 one ? has anybody on here done the swap and got a functioning engine ?
Cheers
Gary
-
here's my 300tdi on it's engine stand
HTH
And before anybody says I know the chuffin bolts are too long but there all I had
Cheers
Gary
.
if anybody had seen me reversing out the garage they would have been chuckling I reckon 
sorry about that , give it a whirl now it should work 
Etching or laser cutting words into thin (shim) steel
in International Forum
Posted
Hi
Give Laser Process click here a try ,I know they are able to etch/mark stuff as well as actually laser cut it , I use them for stuff I need for work and it's very tidy
Cheers
Gary