Spot

Hi All Another question re the problem with my rear brakes. Were all the ABS Booster Blocks on the classic the same? Mine is a big lump with the traction control unit attached by 2 allen bolts. Thanks again Spot

Thanks for that, however it is almost word for word what is in the haynes manual. I am beginning to worry a bit now because I unscrewed the rear brake pipes from the booster unit and no fluid came out. Does this mean the booster unit is the problem or is there something I've missed? (I also checked the pressure reducing valve, there is fluid under pressure going in and comming out!) Spot

Hi all Been reading stuff on here for a while but first post. I have been trying to bleed the brakes on my LSE. Fronts were fine but when bleeding the power circuit, there was only a trickle of fluid on the N/S rear, while there is nothing at all from the O/S rear. Any ideas? I am using the Haynes manual for the process of bleeding, using an eazi bleed kit, with the ABS pump running. I really do need some help, so thanks in advance. Regards Spot