Jump to content

Theviper1987

Settled In
  • Posts

    63
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Theviper1987

  1. Hi I'm looking at getting an aluminium radiator. First question 1 row, 2 row, 3 row rads. Would a 3 row radiator cool better than a 1 or 2 row? Second question When people go on about a 2 core radiator is that the same as a 2 row radiator or does that mean it flows though the radiator twice? Thanks
  2. I can second what was said above I'm a self employed hgv mechanic. Has the snap on gun. It was great on cars but didn't pack the punch needed for lorrys. I now also have the new mac gun. It's brilliant.
  3. Sorry yes auto correct on my phone obviously didn't know what I wanted to say
  4. All sorted.. some how I had got a set of bp6es's fitted swapped them for bp6es's and she is all fixed
  5. Do you mean this? The black wire with the suppression. No I haven't
  6. Right the problem I'm having is. Every now and again I get a miss/hiccup. The fuel pump relay clicks off and on instantly, the rev counter bounces and the lights on the ecu flashes off then back on. Some times it will keep running, some times it cuts out. Iv put a multimeter to the relay and when it clicks I'm getting 12v up the ignition wires(brown) I loose the earth from the ecu,(not sure if i loose the earth or it spikes to a posative. it happens that fast I can't see that volts on the multimeter (blue/purple) Which in turn I loose the 12v going to the coils and fuel pump. I have disconnected the blue/purple wire from relay and put my own earth in to a earth on the dash, it then in turn stops the relay from clicking but the rev counter and lights on the ecu still do the same(it doesn't cut out but u do hear a change in engine tone). I thought it could be a dodgy vr sensor loosing signal or something but it's still the same after changing it. All wiring to plugs and joins are solder so I doubt it's a dodgy crimp terminal somewhere. Here is a list of bits I have changed; Vr sensor Edis8 module ECU plug with the wires prewired in the plug Ht leads Spark plugs I have also tried someone else's ecu with my map loaded on to it and still the same. Any help will be listened to.
  7. Sorted. Nige came to the rescue
  8. Any ideas where I can get one of these??
  9. Would a dodge vr sensor do this? It's the only bit I haven't changed?!?
  10. Sorry about the short video but I had to get it under 1.97mb 20160104_185049111.mp4
  11. No it like 1 second on 0.5seconds off 1 second on 0.5 seconds off. But only when I crank. When I turn the ignition on. The relay clicks on for 5 seconds (pumps prime). I'm trying to post the video but I'm struggling
  12. does this make sence to anyone?
  13. hi all again. iv tried another EDIS-8 and reset my setting to what nige sent me. still the same. iv done a datalog thingy using megatune but cant open it. also I cant upload it. it says 'Error you aren't permitted to upload this kind of file' any ideas im at my whits end. thanks
  14. OK that can be tomorrow's job. I'll load the setting/map that came with the ecu from nige. Thanks for all of yours help.
  15. Yes there is communication between the laptop and computer. How do I go able correcting this fundamental problem? Thanks again for your help all
  16. Every 2 seconds. But I was swapping the leads around trying to find the miss. Gave up for the night and went down he pub. Got up the next morning and it was clicking the relay. Battery is fine. Iv fitted brand new ngk bp6es aswell
  17. It's developed now. It won't even tick over now. Iv tried another ecu with my map on it and it still won't start. When u crank it now the fuel pump relay clicks on and off
  18. Right ms1 question. Iv recently developed a miss fire I can't trace.. iv replaced the spark plugs, ht leads, coil packs.iv checked the timing more time than I can count. And it still only sounds like it's running on 7 lumpy when revving and flat while driving. With the engine running on tick over u can pull every ht lead of individually and it doesn't make it run any worse. Any ideas would be greatly listened to. Thanks
  19. That's what I though but if it works I don't mind paying it. Thanks. I'm running ms1 btw
  20. I'm not to keep on playing inside the ms box. I was looking at one of these. http://pages.ebay.com/link/?nav=item.view&id=151049864676&alt=web
  21. I'm not to keep on playing inside the ms box. I was looking at one of these. http://pages.ebay.com/link/?nav=item.view&id=151049864676&alt=web
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy