GRHH

Hi Kev, I've been told it's for a women's fashion shoot. Unless I mis-heard, it could be a fashin' / fishing shoot! The production company look quite interesting; having done music videos for some fairly big artists. Think I'm going to register my Defender on their database and see if I can get Katy Perry in my Defender. Cheers, Dod

Hi All, A friend of mine is looking for someone to provide a LR Series for a photoshoot in Stonehaven on Friday 10th March. Looking for volunteers, I think it's a paid job.... Unfortunately mine is a 1992 Defender so not old school enough... If anyone is keen please send images to the producer: Michelle michelle@lsproductions.com Here's the facebook link: Thanks in advance, Dod

Cheers Arjan, I'm going to give it a go on Sunday as you suggest. How was it you used ratchet straps to straighten the beast out?

I used Highland Galvanisers (Elgin) as I'm based up in Aberdeen. Highland are a reputable company and they've done good work on other projects, however I fear that whoever did my bulkhead may have been inexperienced and dipped it in hot galv too quickly, without my support brace.

Hi All, First post on a Landy forum...here goes. I have recently refurbished my old 200tdi bulkhead (standard rotting in the corners and footwells) and have had it galvanised for longevity purposes. Having read plenty of posts on here about the galvanising process, I strengthened the lower section by bracing a bar across the outrigger mounts / holes, however after taking it to the galvanisers they have removed the brace (it was held in via nut and bolt through the outrigger holes which was welded to a 3/4" steel rod) as they advised this would have led to stress concentartions... Anyway, result is I now have the bulkhead back with some substantial warping of the driver's side door pillar (and therefore all the surrounding thin metal surrounding the footwell / along the top of the bulkhead). Needless to say I'm pretty p***ed off. The photo attached isn't great to show the damage, I can take more if peoople require. Question is, does anyone know of effective methods of straightening her out? Currently I'm thinking of putting the bulkhead on the chassis and using a bottle jack against the chassis to try and align the holes. However I'm concerned that the warping is so bad that I might not achieve this. My next thought is to resort to heat via tourch and then using a bottle jack? I guess this example goes to show that bracing IS required, and should be welded in to place! Any help would be hugely appreciated. Thanks, George