Jump to content

Cornish Rattler

Settled In
  • Posts

    2,118
  • Joined

  • Last visited

  • Days Won

    9

Everything posted by Cornish Rattler

  1. Cheer's guys i have kept a check on it and topped up as required.
  2. Hi guys Since fitting my roamerdrive just over a year ago my transfer box has leaked from the rear imput shaft seal and sump plate ( ally type ) where before the roamerdrive was fitted it didn't, i pressume with the transfer box having to use a thinner oil as specified by roamerdrive, can't think off top of my head what oil the roamerdrive uses but just wondered if anyone else on here uses ep 90 with a roamerdrive and has it caused any problems 🙂
  3. Rear springs fitted and all seems good 😁
  4. Right as i messed up ordering the springs from Jones springs ( thought i ordered but didn't ) i ended up buying some GME rear springs which i wanted in the first place from paddocks which have now arrived and hopfully weather permitting i will fit them over the weekend 🙂
  5. No i haven't but will do once i've done the springs 👍
  6. Well i tried to order from Paddocks today but couldn't work out which was Britpart or GME springs as Paddocks have updated there website again, i did send them an email last night but not heard anything so i've ordered them from Jones springs but have an 8 week lead time which means i will be busy over Crimbo 😆
  7. Hi guys I'm about to replace my springs and just wondered if GME are still good
  8. Cheer's i will see if i can cut them down and refit and give them a spray 👍
  9. Hi guys And they have only been on 6 months 😡
  10. I was thinking of going the same was but what i've noticed is with para's all round and carrying weight is if the back end say goes down an inch the front will lift up an inch so fitting multi leafs on the back and para's on the front it will probably do the same but not as much so i'm thinking of going back completly to multi leafs.
  11. Can you still get series sliders as the bolt hole patern is slightly different to a series or can i mod it to suit
  12. Yes i have a 109 drop plate but i had forgoten about the drop plate being on so yeah that would work 👍
  13. Is that plate not just for a defender though as the series ones have 8 holes 🙂
  14. At some point a meal in the local seafood restaraunt ( i don't do seafood ) but they did a couple of other menu's like fish and chip and other stuff 🙂
  15. Had a drive to Perranporth and had a pint of Cornish rattler pear cider in the watering hole after having a full english breakie in the cafe in Perranporth as well 😁
  16. Ok cheer's i will look into that 👍
  17. Hi guys Does anyone know if a NATO hitch bolts straight onto a CIVVY 88" rear X member please.
  18. Hi guys Managed to make it to Cornwall yesterday
  19. Thanks guys, it will also be used whilst being away camping and vacing sand and grass out as my metal detectors and stuff go in the back of the landy and grass gets everywhere in the roof tent 🙂
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy