Jump to content

benji09

Settled In
  • Posts

    90
  • Joined

  • Last visited

Everything posted by benji09

  1. This side wasn't as bad so didn't need a full panel
  2. Just a bit of weld to clean off then the other side to start
  3. Start off with happy new year Rebuilding my 90 because it fell on its side Got them the wrong way round
  4. Lol no but the centre box made a good appearance lol
  5. I was on a little slope trying to pop a spring back in and when moving forwards after the spring went in it slipped on a flat rock and slid the front end over and the rest is in the pics and to top it off the spring came back out
  6. There is more in my gallery lol
  7. Lol I did try but the pics on my phone were a little too big
  8. Thanks for the help I re did all four just for peace of mind plus had a really good look at them today and found a couple of the little metal cap things where missing of the ujs both front and rear I wormed the grease up before I greased them in hot/warm water think my next job is going to be the rear a frame ball joint but thinking of getting one already pressed in been told they can be a pain to press out but thanks aging guys for the info and help much appreciated
  9. I phoned euro and was quoted £49 Inc vat for one uj
  10. Thanks is it a one fits all kind of thing as mine is a 1988
  11. Found the culprit the rear uj is bad so I want to change this is there anywhere near keighley that sells these over the counter and do I need a specific type or will one fit all
  12. if it's not clunking or making a noise I'm worried

  13. Buy the one you like and modify it for the use you require
  14. Will give them a good wiggle around and a good luck see if I have missed anything and check to see if there is any missing niples on the uj mite just be easier to replace them and its another possibility eliminated thanks for the help didn't know the niples could be removed al let you know how I get on
  15. There doesn't seem to be any where to grease the uj niples etc
  16. Lol I have been under over in out fixing little bodge jobs another look under it will be I'm not trusting the garage too much ad they left my rear sings half out after they had it on the ramp
  17. I took it to the garage to have the ujs checked he told me they were fine bit I don't think this is the case as they clunk when taking up drive either that or the rear a frame ball joint is the culprit for the clunk but you can hear it from the front every now and then
  18. Small sound I can't figure where it's coming from or what it mite be, so in any gear as I'm building up speed there's a hamster wheel sound, squeek squeek I'm at 30 and steady away it starts if I let off the accellorater it goes, than back as soon as I go again, but if I put my foot down noise goes, at any speed out of gear free rolling no squeeking what's so ever any one have any ideas as to what this mite be your help is appreciated
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy