Mike110DT

It is the radius arm.... got a bit more play on the left than the right side Would take it out and check if the total is still straight but as mentioned, you will need a lot of forces to get that bugger bent int total Nice 110 and nice location, I'll be in Trinidad in mid June, POS & Point Lisas

Ballock, thanks for the welcome, which I appreciate. I fully agree with you, but fro time to time I see all the fancy Defenders driving with those lights all the time switch on, so curious if such are different in this case. But assuming that they then always drive with partly light switch on and have the fancy LED truck lights where is already enough light to be visual in the end I will wire them as indicated and see how it looks, thanks to you guys

strange rule

Ah okay that fully understandable, means the normal position like the radio has when ignition in position 2 and as normal when all other units getting power = not 24 hrs power, only ignition power but would still mean that lights would go off when I switch on the normal head lights as per sentence on the module

Good evening good a set of 2 pcs DRL lights for the front bumper from a friend. have a question if someone has similar installed? Have a DRL Module included but here comes the question about the connection. What is the ACC? Why are the lights not working as written on the controller when they are connected there? Would like to have them working when normal lights are switch on. Any advise from your ends? the “headlight” wire means that I would borrow the wire thief from the original headlights or from the smaller standby lights from the front? Sorry for such question, would be good to get your input how to solve these issues.

perhaps then for the case of loss?! you cannot make anything wrong if you put as well in the middle the double sided tape too for your exact location

Tim those strips are for keeping the heating elements in position when you place everything in the seats If you drop yourself in the seat, sometimes it will most likely try to move itself and not stay in the original position

quick update here as I failed German MOT..... was then travelling for 2 weeks and gave it now for repairs during these 2 weeks What they have done and I saw it this morning, they have cut the full length of the crossmember until shockabsorbers and rebuild it on their own. Got new MOT now Looks really good and didn't costs as expected! 1000€ in TTL Pictures will follow

okay super, have asked and requested information i.e. price and possible delivery too let's see if i am lucky now

Thanks Paddy.... Tried again a few times this morning and they confiirmed that no overseas supply 😞 how much was it approx for the DDS stuff? They look great

Western, right, page still working but that’s all it seems like. Will try to get a hold of him tomorrow again...

hey, a quick question here, is Dixon Fabrication still fabricating/online? Tried to call = no answer, email = no answer, the facebook page is offline and the ebay store is empty Wanted to know if they would ship to Germany too but no any response.... Any other good suggestion including the long extensions? Anyone an idea if someone is selling the single Dixon extension singly?

Hey folks have a short question as I cannot get any valuable feedback until now from suppliers, but looking for the top part repair section of the doors where the window starts and going upwards, second row door It's a 110, 99, TD5 Can I take for example the bottom repair section and cut it in half in the middle to fit this? Anyone had this issue too? Great to hear and have a weekend full of maintenance

hey guys, I checked ont he weekend the pillar and tried everything to get the spot welds behind the side frame off, but no chance without taking it away. So, did the same and cut only partly and inserted.... no any other chance in that case but that was the dangerous part for MOT in the coming month Thanks to your support in this case, this weekend will do the other side too

dumb iron is an issue with mine and I will rebuild them as they look really carp 😞 luckily I have a good guy at the German MOT station.... but for that I will most likely do a new topic when that is finished.... not buying the dumb irons from internet