Jump to content

JUKE179r

Settled In
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by JUKE179r

  1. JUKE179r
    ...
  2. JUKE179r
    Really nice job. BTW... I've always wanted to add a lock to my glovebox. BTW... Bear Down...
  3. JUKE179r
    Same here at 50 years old. No fever or chills but the common cold/allergy symptoms. I can even hold my breath for over 10 seconds with any chest pain or discomfort.
  4. JUKE179r
    Checked for blown fuses?
  5. JUKE179r
    Still a good show though.
  6. JUKE179r
    It was meant as a joke mate. @Nonimouse and I could have googled your question for you too. lol
  7. JUKE179r
    Could be bad fuel? Do the easy things first... check or replace air filter, spray clean MAF sensor, throttle body and also the IAC valve. Report back...
  8. JUKE179r
    definitely eBay.
  9. JUKE179r
    Gotcha. Cheers! I received my pair of front hubs made by Taiwan company Trusted Reliable Quality (TRQ) part number BHA54105 / 1ASHF00449 which cross references to Land Rover’s part number TAY100060. These front hubs have the indent channel for the rear hub's o-ring.
  10. JUKE179r
    Is this true? I've read on a few other forums that the D2 front hubs had the longer sensor cable. I looked in the RAVE manual and it doesn't specify the lengths. Maybe the length is up to the different manufacturers of the hub?
  11. JUKE179r
    Get an UltraGauge or a good diagnostic tester to monitor your temps in digits.
  12. JUKE179r
    Is the alarm going off also with flashing lights? try resetting the inertia switch under the bonnet or opening your drivers door with the EKA code.
  13. JUKE179r
    A couple of the Land Rover stealerships in my East Anglia area charge 80+ quid to retrieve the EKA Code. That is ridiculous for a 10 second scan. I do it for free (or for a beer!) for forum members in the local area with my Nanocom.
  14. JUKE179r
    IMHO... Find someone with a Foxwell, Hawkeye or Nanocom to help change that EKA code to something easier to input and remember.
  15. JUKE179r
    Good to know.
  16. JUKE179r
    Those SRD500070 SLABS units are hard to find but do pop up on eBay every once in a while for crazy money.
  17. JUKE179r
    Like rockets on a turtle. lol
  18. JUKE179r
    On my Disco 2 I have a 75lbs (pounds) strut I bought off of an eBay seller in the states. They came as a set but I only used 1 gas prop. I tried a 60lbs strut at first but it wasn't strong enough and couldn't hold the bonnet open. 75lbs works great.
  19. JUKE179r
    The flashing M&S lights can be caused by any electrical faults. Low battery voltage, bad/loose connections to battery, xyz switch going bad, alternator going bad... Get the fault codes read so you can narrow down the problem.
  20. JUKE179r
    Cheap fix but very time consuming if the shift doesn't work. if it were the stock front driveshaft, I'd replace it.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept