Dr0v3r

Fitted RX8 seats a while back. Wired the driver one up fine, but never got around to wiring up the seat heaters. With all this cold weather it has inspired me to get on with wiring up the seat heaters. I bought some relays to fit under the passenger seat, but I am unsure of what size cable to use for the heater power supply, and what size fuse I should fit. I could work it out with some Maffs, but that would make my head hurt. Has anyone already done this? What size cable did you use, and what size fuse?

Hi, this question has probably been asked many a time before. We need to replace the calipers on our 1986 90. It has the early front axle fitted (22L07522B). The P/N's on the IPC are confusing me. It seems to say RTC 3380 & 3381, when I go to the suppliers some of them say RTC 4998& 4999 are compatable. Is that correct? Last time I ordered them (about 6 years ago) I ordered the 3380 ones. Now those are getting expensive and the 4998 ones are much cheaper. Do I need to order the 3380 ones, and why?

MOD been done a while now, don't get variable intermittent wipe though despite fitting a VW 99 relay. The other thing is, the wipers keep blowing the wiper fuse randomly. Wondering if I need a resistor in circuit somewhere. The only thing that's different electrically is the newer wiper switch. The relay is only used on intermittent and wash/wipe.