Jump to content

Spud63

Getting Comfortable
  • Posts

    8
  • Joined

  • Last visited

Reputation

1 Neutral

Profile Information

  • Location
    Alton Hampshire (GU34)

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Have completed the change all works great, one word of caution, the BMW plug is universal therefore can be fitted either way round so ensure that you have the pin / socket orientation correct. Hope this helps. Spud
  2. I have just put some info up, sorry for the delay.
  3. Sorry For the delay in getting back with an answer folks BUT good news, I have finally sourced all the items for the plug. All sourced from E Bay, from the seller: Pantri Trading, I had a fair number of exchanges with them which I must add was positive and helpful. The prices quoted do seem steep but they are open to you making an offer. If there is not sufficient stock they will source and let you know. Attached hopefully is a photo with the required parts, the numbers I am lead to believe are the BMW part numbers and they relate to the E Bay ordering. I hope this helps people, I am hopefully finishing the loom change tomorrow evening. It has been a bit of a headache but the results mean I now have a good loom which should last me out ... Hopefully Anything that I may be able to help with please ask. Cheers Spud
  4. Just received the plug through the post, new it was to good to be true, right configuration but completely the wrong size! I suppose that's the problem when you are trying to reverse engineer something, oh well back to the searching. As I am new to this! Can someone please let me know how to contact PaulMc, I have seen some of his answers and I agree that he may be the go to man for this. Cheers Spud
  5. Hi Folks Looking to renew the rear loom on my TD5 90, have sourced nearly all the connectors and wiring, however the Fuel pump plug has been troublesome. Have sourced a BMW wiring cable plug part No. BMW8367072. My question is can anyone please direct me to where I can get the correct terminals for it? Will the Molex crimp terminals fit? part no. 02-09-118 (18-24 awg) Many thanks Spud
  6. Hi Folks, new arrival! I have a 2001 TD5 90 County. Used to have a nice 300TDi before it got stolen and torched. I am looking at replacing my Chassis loom in the spring so am going to get the appropriate bits over the winter, having read some of the threads I see that there is a supply of connectors available (PaulMc) My harness was "butchered!" by the people that put my defender together (less said the better), so I would like to restore some sort of standard wiring back to it. The existing connector has a mixture of wire gauges in it does the Sumitomo HW series allow for this to be done or do I need to split the loom up? and do you have stock of the other two connectors. I assume that the kits come complete with shells, pins, locking shields and seals. Cheers folks Spud63
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy