FishBon

Hi every one again, now We replace V8 3.9 and mount V8 4.6 60D I need help to find injectors dead time (maybe it's bosch 0 280 155 778)

thank's a lot i saw that page's yet 2 week ago

now The engine start more better there is working VE and SPARK table maps WHat do U think

Hello again there is 2 degree btdc in manager on idling and strobo confirmed it'scon

Hi again, what about original VE ang spark table map for V8 3,9 can i see it's somewhere?

the injectors dead time for Deka 6354 there is

Hi again before was CUX14 and distributor (motor work very poor and low power until 3500 rpm) the injectors is new and fuel pressure adjuster change to 3 bar the flow rate of injectors is 205 cc/min the upper dead center of 1 piston is on 8 tooth How can i rescale VE and ignition map for V8 3.9 ?

coil pack

v8 4.0

Hi, there are coil packs (wasted spark) and ckp sensor (the wheel is 36-1) the spark and fuel maps i found in internet (i think that it should be for my motor? but i'm not sure) there are for 3.9 and for 4.0 V8 that i found

also there is LOG's *.csv if it's help to https://yadi.sk/d/qhtkc_n4iqxT8A

Hi Fridge i think that Secu3t it's light clone of megasquirt U don't need to study it (sorry for bad english) I just need help to know that i use correct VE and Ignition maps or not for this engine (v8 efi 3.9 L) There is foto from Ladoga 2015 there is from Ladoga 2016 and here is video 15/08/2020 WhatsApp Video 2020-08-15 at 15.00.56.mp4

Hi guys. Could somebody send VE and spark table maps The engine is from Discovery I and auto transmittion ZF V8 3.9 L (compression is 8,13:1) the injectors is deka 1d zmz 6354 it's defender build to sport (trophy TR-2) there are some pictures of manager and wire shema Now the engine start after 8-12 sec. and there is low power until 2800 rpm, yeasterday it's make 0-80km/h about 12,5 sec