jack54turbo

I had a feeling this would be the case :/ The body roll dubery has been disconnected along with the air suspension and a 15p td5 fitted (triggers broom!) I'll start with checking the led's, I have plugged it in and got a speed sensor code which I've cleared and will re check

Hi all, hope your having a cracking Sunday ? Recently got a high mileage disco 2 as a tow vehicle. Slowly working my way through all the things that don't work lol The main issue I'm a bit stumped with is this: The abs/traction control and hill decent are all not working. The large square (not the spade) fuse under the bonnet 30amp marked on the list as "SM" was blown, so I swapped it from the spare (I had a spare one from what used to be the air sus but it's been removed) Now the abs works..... But no light comes up on the dash and the TC and HD are still not working. Do the discos use the and sensor for the TC? Very grateful for Any advice guys and gals ? Jack

Hi Guys, Just tryinf to get a few rough numbers together If Your concidering coming, or are definately coming could you put a quick post on here to show your interest Thanks everyone Jack

This really is a GREAT! Site guys, acces is not granted very often! The address is: The Maultway, Camberley, GU15 3UZ D1 Training Area, M3 Junction 3 There will be A burger van! All vehicles welcome! fom enduro bikes to forward controls and 101's !! If you dont want to pre book, then just call john and pay on the day Thanks Again Jack

Hi All, Just a quick post to spread the word off the Blue Light Off Road Club's pay and play day on the second of october. The event is to be held at the MOD training Area in Bagshot, Surrey. Please see the Poster atatched Hope to see you there Jack John Amos: 07976 157285 MudNGritposterOCT2011.pdf

Hi All! Just a quick post to make you aware all of a pay&play day aranged by a friend of mine John Amos head organiser of the Blue Light off road club. This is a fantastic opportunity to have access to one of the UK's best army training sites! Not to be missed Site is located off Oakhanger lane, Bordon. You can contact John on:07976157285 or blorc@hotmail.co.uk Hope to see you all there ? Thanks all Jack

does anyone have a paint code for the land rover black?

Hi all me GAIN!!!! i have recently rebuilt my 1996 300tdi defender, all new body work, a nice new set of puma doors!!!! i was going to spray it bonnatti grey , but thats a three stage paint!!!!, so i was wondereing if any one had any ideas on what colour would look good that i can do in synthetics/or two-pac??? and if so if you might also have the paint code thanks to all jack

hi jason thank you for your adive, the only issue i have with skins is the spot welding side of things as i dont own a spot welder?? cheers dude jack

Hi all me again!!!! i have recently replace all the body work on my 1996 300tdi defender. the rear tub was taken from a td5 model, so naturaly the filler neck does not line up does any one have any ideas?? (apart from d44's £200 aero cap!!!) cheers all jack

haha i live in kings langley hertfordshire, i may look into pass plus

Hi all i am at my witts end!!!!!, i am 18 years old and have been driving my 1996 300tdi defender about 6mnths i pay two thousand pounds a year ahhhhhhhh im sick of it, why should i!!!!!, i am a good, safe , and considerate driver, not some yob in nova or a corsa! so please all any help would be appreciated thanks all jack

A Likely cause for a big loud wine is telling my girlfreind i have spent all my money on the landy, thats why were not eating for a week!!!!! (sorry all had to be done!!!!)

thanks all i have checked it properly today and it spins frealy no noise etc!!! shal i just adjust ??? but i did notice water is in my axle, big bad news?? cheers jack

thanks allot, deffo think ill sort it asap probs wont drive it around lol jack

Hi All! Got back from Donnongton park Today(2hrs each way), to discover a shot wheel bearing and uj!!!! so i found an old prop i had laying around(as you do lol) and bodged my uj up lol!, i have greased it but it was very worn (205k) No such luck for the wheel bearing, gave the wheel a good wobble! and it does have play in it!! and it sqeaks when driving so firstly can i limp it around for a while??? and should i buy a bearing kit, or individual bits?? and best place paddock?? Thanks all Jack

WOW!!

hey m8! i tend to agree tapping that kind of hardened material would be id say almost inpossibe without a lathe!! p.s. this might be worth a look in!! http://www.amanet.co.uk/td5oilpumpfailure.htm it appears my boy your not the first victim lol cheers all jack

would have loved to come, but the indoor 4x4 show is at donnington 22nd soz jack

Im Thought id give it a go, plus im after a few bargain bits lol its to be my first show did anyone go last year? seeing d44's chalenge truck would also be an added bonus!!! jack

HI all just thougt you all would like to know that MM 4x4 have obviously decided that despite all our comments to not even sending a reply!!! my parts still havent been picked up!! ill post em back and hope that eventually that i might get some money back!! cheers all jack

hi all! lol as ashamed i am to admit this but i actually used to work for halfords (hemel hempstead!) and its all true there trade prices are silly cheap but beware not all items are cheaper!!! well branded unusual servive items can work out more than say , bennetts or all parts!! cheers jack

hey grant just to say i drove past ktm today to make sure all was ok. ill see you soon m8 and ill give steve your keys first thing in the morning. cheers jack

hahaha meerkats are funny!

that is exactly what mm4x4 told me. ill have to look into that further thanks allot jack