slayor2005

Ok you two i will look into your answers and see what i can find. Thanking you

Its a Defender 90--1988 200TDI Engine is about a 1990 replacement and the rear window is brand new with a Autosparks loom

Can anyone tell me what Relay i need to put into the system between the rear heated window and the switch via a fuse ( 15amp ) but this keeps blowing after about 20/30 seconds. Thanking you in advance Slayor 2005

Hi every one more or less finished my work on my 90 I've been doing Defender 90 but the fusing of the new rear heated window has a problem somewhere the first time i tried it the fuse blew but that was my fault i had put wrong size amp fuse in it was only 10amps but then put in a 15amp in as i was lead to beleave that the amps for a heated rear window was 12.5 amps but it blew after about 5 minutes any got any ideas why. Thanking you all in advance

It seems that it may be named a dashboard shelf and not a parcel shelf.

Hi Anderzander The rear of the two switches stick out by around 40mm and all the wires that will sit under the panel just all seem to get in the way now so it don't sit well how need it go before i removed that top shelf ??.

Hi i took out me parcel shelf which sits behind the center switch panel it had the cigarette lighter in it i put a switch for the rear wash wipe in and now can't seem to get it back in past the cables as they get in the way what have i done wrong do i cut out a hole to let them though the shelf and then cover with the half dome that fits straight behind.

Thanks a lot Simonb it confirms what i was thinking it just leaves me to fine the right size cable from my batteryto my new extra 4 way fuse board i was thinking maybe 27 amp or do i go up to 70 amp for future use as the fuse holder can take 100 amp max

Hi Troll Hunter The set up i have is simple i put a second pump motor into the front washer tank to feed the rear window that goes though to wash/wipe switch also new in dash and that works the wiper as well when turned right and the heated rear window has its own original switch. so i just need to know fuse size for the two.

Good Morning everyone just finished my wiring to the rear washer and wipe all new setup but confusion reigns over fuse size because all blogs refer that a wiper is 15 amp a washer is 5-7.5 amp so as the wash/wipe works of one switch what size fuse do i put in the holder as this makes up to 20 plus amps intotal.

Miketomcat I will try and get down to you when things improve for me but thank you again for now.

Thank you Nonimouse I appreciate your post but its a long way down to Somerset but thanks again.

Thanks Troll Hunter but your write up is not on the page anymore the door card as already been removed and a new rail put in place all rust cut away and metal primed just needs welding.

Cheers miketomcat i wait to hear

Thank you guys for your reply's. Monkie i think i will have to try a land rover business in Eversley i go there for parts. Fridgefreezer i do know of Keith Gott and yes there rates are high but its par for coarse and Miketomcat i tried a local club but they where only into heavy off roading and thats not my scene, get a lot of wiring diagrams and info on the heated rear window and wiper done all my research but got nowhere, just to old for it to sink in.

What do you have to do to get anyone to help you even for payment when you just can't sort it yourself people say yes they will help and just don't turn up. I live in North Hampshire and i need someone to help weld the new bottom section of my front doors, and the brake in frame by the top door lock button. also to help get the wiring right for my rear door heated screen and wipe/wash switch and glow plug relay doe's any one live near by ??

Thanks you two i'am planning on a heated rear windscreen + wiper and an extra water pump for the rear screen with two spare at the moment.

Hi everyone, one question what size wire / cable do i need to feed a fuse box that has a 100amp max rate 4 ports. I wait to hear thank you

Thank You Jeremy996 it doe's look like the only option

Yes i was just thinking of that and about to have a look to see if the internet has anything. But thank you for your reply Arjan

Just found another problem where doe's every one fit there radio speakers as i have just bought a pair of 4" speakers that with front grill come out at 5" but my problem is the depth. On the near side the back of the speaker hits the wiper motor so what's the answer, this is in a defender 90, 1988 Look forward to the reply's

Ok i will look in to that and see what i come up with its worth a try. Thank you

So it is over looked them got enough from them in the past.

Hi Litch Pardon for having to ask but who are BP ??

Thank you for your reply Three Point Five .but as far as i know it is very common, but your does not crease inwards than ?