suveer

Hi the vehicle has not been stored. It is used often. Also have a new clutch plate fitted. forgive me for the incorrect terminlogy i used. teh cluth takes right on the floor

hi guys im hoping somebody can help me. i have series 3 LWB, 1976 model. I dont have much clutch when the pedal is pressed. The adjustment on the pedal is max. Also have a new clutch plate fitted. It just feels that the clutch is not engaged fully when pressed. The gears also dont engage properly. regards

thanks HTH, will try that.

hi all i have a 300tdi discovery (1997 model). i have suddenly noticed that when i turn the steering hard or jerk it towards left or right, it seems to lock up in the process. it seems that something is holding the steering from turning. any ideas what could be happening. is it the steering box or power steering pump? please help. regards

thanks guys. It seems like i will have my hands full. cheers

Hi All Some help will be appreciated. when i engage reverse on my 1976 series 111 LWB, i hear a tock,tock..... sound while reversing. i am told that a tooth might be broken on the reverse idler gear.Must the entire gearbox be removed to replace this gear. Please help. cheers

hi No, i havent tried bleeding as i thought that since the hydraulics were not tampered with there is no need to bleed. but i will try though. thx

hi all Is there a way to adjust the clutch on a series 3 landy. I just replaced the clutch plate and the clutch seems to be taking right at the bottom. I barely leave the pedal and the vehicle starts moving. gears are hard to engage as well. any help will be appreciated. thx

thanks Western. am gonna try this as soon as possible.

hi guys How do i get the air to blow through the air vents from the dash, i.e just above the gear lever. Currently when i put the heater on, it blows only through the windscreen vent. The lever on the right side near the drivers door is correctly positioned in that it is reflecting as blowing through the dash, but unfortunately still only comes out throught the windscreen. Any help will be appreciated.

Hi guys I have replaced the panhard rod bushes as advised. Problem now sorted. Thanks guys. This forum rocks!!!

i have the OME suspension. There is no noticable lift. Only lifted by 10mm

Hi LandymanLuke The play is up/down and very minimal, you can hardly feel it. The reason why i am asking is because at 40-50km/h i can feel a slight vibration. The UJ's are fine, wheels balanced etc but only at 40km/h i feel a vibration. Any thoughts? cheers

Hi guys I need some help please. I have a defender 90 2.8i. The front propshaft connects to the gearbox. My question: how much free play must the gearbox shaft have. The reason i ask is because the flange on the gearbox has a slight play. IS this ok. thanks guys.

This a 2.8i defender.(BMW motor) i dont think there are wading plugs for this defender.