neil01

thanks. if i removed the rear prop and covered the hole in the rear diff, would i be able to drive it whilst i have the diff lock on? this obviously would only be a very short term solution as i need to get to somewhere before i can get the diff replaced. i have seen on another forum that someone has said they have driven with the front propshaft off.

hi, well looking underneath today, this is the cause of the rattle!! can anyone explain to me what has happened please? thanks.

the noise itself seems to be coming from the front. there was a loud rattling coming from,what seemed like, just in front of the drivers footwell........not sure if this was down to vibration at all...? i will check the rear tomorrow. thanks for the reply.

Hi All, hope you can help with this (im sure you can!!). apologies if this isnt in the right section but i only have til sunday PM to afternoon to try and get this sorted or use other means of transport. i was driving home on the A1 and as i came to traffic i applied the brake and this god awful rattling noise started. then i lost power to the wheels. The engine was still running fine. got to the side of the road and checked underneath but could not see any dumped oil or bits etc. got back in (engine still idling) , put it in gear and tried to move forward in low ration...nothing all i get in high or low ration (when in gear) is a rattling or banging type noise. when i slip it back out of gear and apply the hand brake, the noise stops. I put the diff lock on in high ratio and was able to drive, i managed to get the disco home. i had called out a recovery service who loaded me onto his flatbed. he said when i was driving up the flat bed, with the diff on, that the front wheels started spinning to get traction but the rear did not. any help would be great and is this going to be expensive. any link to other threads would be good thanks. thanks in advance and apologies again, but i need answers quick. Neil

Hi all, seen a couple of DISCO 2 Boot interior cards on eblag, they are the type that have storage bins with top lids on them. simple question, will they fit in my DISCO 1. she's an L reg an the interior is looking tatty and i'm looking into changing bits over time. thanks in advance, Neil.

checked the child lock and it wasnt that thanks. took the door card off had a look around and WD40 and that all seems to be working now. anyone got any tips for the boot door and central locking? ( i havent stripped the boot lock yet). regards, Neil.

hi do anyone have an exploded diagram of the above. thanks neil

hi all, i have a couple of problems with my door locks on my disco 1, hope you can help with some pointers before i start pulling all the door cards off!! 1) rear o/s passenger door. the door opens from the outsdie but i cannot open from the inside. 2) boot door. the door will not lock. the key will make the plunger go up and down but it doesn't lock the door. 3) central locking/key fob. the fob doesnt lock or open the doors. i have changed the battery and used the spare fob but still doesnt work. it has done in the past. the key will lock and unlock all doors when operated in the drivers door. thanks in advance. Neil

thanks again, i promise i will download the microcat myself soon..........

Hi, could i have the part number for the above please. thanks in advance, Neil

thanks guys, brill. just what i needed. cheers, N

hi all, fitting 7.50/R16's tomorrow on my disco, i know i will have to adjust the steering stops, but i'm sure there is a post on here with a pic of which nut to turn and which way to turn it but i cant find it!! (yes i have tried searching) sorry for such a mundane post but a link to the topic would be great. thanks in advance to all the knowledgable ones!! cheers, Neil.

that is great, as ever.... thanks, i bow to thee........ regards, Neil.

hi all, it seems that i have mislaid the rubber bush and the washers from the bottom of my replacement rear shock for my disco 1. it is just a basic pritpart one. can anyone help with replacement parts, numbers etc or will i have to get the whole shock. thanks in advance, Neil.

hhehehe, welcome to my world.....! see the thread: http://forums.lr4x4.com/index.php?showtopic=49431&st=0&p=449502&fromsearch=1entry449502 tbh your aint that bad....at least you have an edge for your boot floor. mine is in the welders shop at work waiting to be done......new plate straight across where the old one was. regards, Neil