Clint

I have seen a few on the M6 around Stafford going north over the last 3 weeks all with one driver and I saw one in Burnham on sea 3 weeks ago with a family in it.

Hi I had this happen with my discovery and i just gave the gear stick a hefty shove/thump and it came out of gear. I kept meaning to investigate the cause but never got round to it and 20,000 miles later the Disco was written of but in that time it never happened again. This was a R380 box. Hope this helps(not much I Know)

I had this on my 96 disco. The problem was crud in the towing socket, a quick clean out and a spray of contact cleaner and all sorted. Hope this helps

When I had this on my 300tdi it was the rear diff kicking the bucket. Hope this helps.

A second vote for Clive and Causeway 4x4. Never let me down.

Hi All makes do one. Part no. GAF906. Hope this helps

Sorry for a late reply hopefully of use though. I fitted one to about 18 months ago and worked as it should.

When I had my '94 Auto I got 23ish round town and 30ish on the motorway. I had the aircon on all the time and never hung about. Cheers Clint

If you download MagicDisc you can create a virtual drive and run the ISO on your computer. Hope this helps.

Could be the teeth on the regulator stripped as if I remember correctly the window limits are torque sensed.

Glad you sorted your problem. A bit off topic, years ago I had a 24v Scorpio that failed to start on a few occasions. After much checking and swearing I bit the bullet and took it to Ford who said the engine ECU was shot. Two days later when they went to fit a new ECU the real problem was found. A small colony of ants had set up home in there and every now and again they would short the ECU and cause the car not to start. A quick bit if hoovering and the problem was gone.

Not wishing to upset any one but I would disconnect the earth first.

If you check out Brightwells sight they have the results from previous auctions. Me me press me!!

Hi all, don't post often but lurk a lot. My seat broke last week and I've done a temp fix using some 6inch lap fencing and a couple of small rachet straps. I slid the wood under the frame and used the straps to support it. The seat is now very firm and I sit slightly higher than normal but it will do untill I get round to a proper fix*. Hope this helps. *Fixed my passenger window 3 months ago with 2 bits of 4X2, must sort that as well