Hi,
has anyone of you installed the PTO winch on the front of an TD5 defender?
If yes how you put, build the propshaft under the engine? I am trying to build the Fairey winch on my 90, but now I have a big problem because the engine in too deep and when I go in twist the engine touch the propshaft.
Any suggestion?
Thanks.
Matej
Sory for my bed English
Thanks,
We have done everything what you suggest to as.
We think in the system is air,
The problem is how to purge the system.
We tray with the accelerator 5x but the problem is the same.
We full the lines with air and they are OK
Fuel filter new, new gasket
The problem remains
Other ideas?
Hi,
I have a problem to start the engine on my defenders TD5.
I have changed the fuel pump, the pressure regulator and remove the EGR valve. Now I can not start the engine .
Where is the problem?
Yes we put a new gasket on the pressure reg.
We put the pipes in the correct holes as on the workshop manual.
We change the fuel filter, and do everything what is necessary.
We have a look to the relays and everything is OK.
The engine starts for a few seconds and then stops.