lurch

its a 5 door thanks for the info from what you have said with a bit of triming i may get away with 35's then..

Hi all I am after some advice been searching and reading for hours.. What i want to do is get 33,s on the disco i just got and need to see what mods will need to be done here is what i had planned will it do the job. +2" springs 2" spring spacers 1" Body lift +5" Shocks 6 Deg Castor corected radius arms and trailing arms Adjustable panhard rod Wide ange propshafts Extended break lines 30mm Wheel spacers So if I do that will I be able to get 33's on it without having to hack out loads of the body and still be able to turn corners!!! Tyre is 305/70/16 or (33X12.5X16) If the 33's wont fit what size would you say would fit I am not the most technical person in the world so if you could give any responses in a easy to understand way Cheers Nathan

Hi I have a 97 300 tdi and am going to mod it for some serious offroading and would like some advice before I even start! I always see on here people asking how to go from 33,s then to 35,s then to 37,s so I have decided to do it the easy way or not and go straight to 37,s. What i have decided to go for is the Scorpion Racing Extreme kit with I hope a 3" lift from that I will also be fitting double cardan propshafts, upgrading the half shafts, cv joints, rose jointed panhard rods and trailing arms etc I am also going to fit ARB Air Lockers front and back. What I need to know is how much of a body lift am I going to need and how much of the arches will I needs to lose to get some 37,s on it. it is a 3 dooor so no major problem cutting a fair bit of body out. Also if anyone can help what sort of ratio would you sugest for this set up. I would like to get it right the first time so any advice is welcome Cheers

Hi I have a 97 300 tdi and am going to mod it for some serious offroading and would like some advice before I even start! I always see on here people asking how to go from 33,s then to 35,s then to 37,s so I have decided to do it the easy way or not and go straight to 37,s. What i have decided to go for is the Scorpion Racing Extreme kit with I hope a 3" lift from that I will also be fitting double cardan propshafts, upgrading the half shafts, cv joints, rose jointed panhard rods and trailing arms etc I am also going to fit ARB Air Lockers front and back. What I need to know is how much of a body lift am I going to need and how much of the arches will I needs to lose to get some 37,s on it. it is a 3 dooor so no major problem cutting a fair bit of body out. Also if anyone can help what sort of ratio would you sugest for this set up. I would like to get it right the first time so any advice is welcome Cheers