Jump to content

big tim

Settled In
  • Posts

    48
  • Joined

  • Last visited

Everything posted by big tim

  1. I had a simalar problem to yours mine. Turned out to be the oil pick up pipe had come loose not had a problem since
  2. If your blind. safari or south down
  3. I use one of these works a treat http://www.ebay.co.uk/itm/UNIVERSAL-GREASE-BEARING-PACKER-TOOL-/180686753919?pt=UK_Hand_Tools_Equipment&hash=item2a11c5107f
  4. Gwyn Lewis does a damper relocation kit. I have run one on my truck for the past year with no props http://www.gwynlewis4x4.co.uk/damper%20relocation%20fitment%20guide.pdf
  5. Are spectators welcome at this challenge event?
  6. I use TFR and a hose pipe works a treat
  7. I belive a 285/75/16 is roughly a 33/10.5/16 so you will need a bit more than a camel cut. For that you will need flexi arches. I would suggest you fit the lift kit then see how the steering is i.e does it self centre some trucks can get away without caster arms. personaly i wouldnt fit pro comps just had one of mine let go but it has been on 2 1/2 years but i always thought they where a bit bouncy on the road just ordered some terrafima's.Hope this helps a little
  8. My old tensioner was smooth the new one aint and it works very well.
  9. The tensioner is different as its ribbed to match the inside of the belt.
  10. Removed the aircon pump on my sep engine took a while to find the correct parts but worth it as it frees up quite alot of space. The ally bracket that the tensioner bolts to will need another hole postion drilling to locate the new tensioner. I will have alook to see is i still have the part numbers.
  11. Hi I need to replace the c.v's on my 3.9v8 98plate disco with A.B.S as they are clicking a little on full lock. I was going to replace them with hardy spicer c.v's but i have since been informed that they are no longer available . Can any one advise on another make apart britpart or having to remortage for ashcroft c.v's. Cheers Tim
  12. Have you tried here http://cgi.ebay.co.uk/37-13-00-17-TSL-SUPER-SWAMPER-BOGGERS-Wheels-Tyres-x-4-/190389422087?cmd=ViewItem&pt=UK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET&hash=item2c54180807 Charles can normaly do a good price give him a shout.
  13. Had alook at my dizzy and there is nowt bolted to the side but has a plug with i think 2 wires going to the inside of the dizzy
  14. Where abouts would i find this?
  15. Evening guys i seem to be having an issue wuth my 1998 3.9 v8 auto disco.When starting the engine the engine fires up then dies down and stalls but when restarted it fires up as normal and runs fine . This problem has only been happing about a week or so. I have replaced the idle control valve about 2 months ago with a genuine item. I would be very grateful of any help to resolve this issue cheers Tim
  16. The holes with the sealant around are coolent galleries i think as i replaced mine a couple of weeks ago due to the drivers side bank having a similar leak.
  17. Check for play in the swivals and wheel bearings as these can affect the abs system
  18. Where can i buy one of those extreme wide angle props
  19. Hi Bow are spectators allowed on site on the sunday cheers Tim
  20. I have heard some good things about Hollymoorside. Don't think I shall be able to make the next but the one after should be cool, on the plus side its not far for me.
  21. What dia bolts are normaly used on beadlocks. will have alook at some pics to get an idea nice one BishBosh
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy