Jump to content

DubMart

Getting Comfortable
  • Posts

    6
  • Joined

  • Last visited

Everything posted by DubMart

  1. thats really tidy mate! i need to sort mine out to try and it it to work with the original hanger because its rattling abit too much Martin.
  2. Yeah loose connection, i just got a pair of pliers and squished the connection a little on the wire so it fits a bit tighter, and now it fine Martin.
  3. Good you got it sorted mate, i had the same problem the other week Martin.
  4. Ive have just nearly finished mine, but i have seam welded all the way round the floor lip, as pretty much all of the struts were rotten and the sill that it should sit on. Its probably been the most stressful thing i have tried to do on a car But its worth it in the end Ill post some pictures up tomorow most probably. I should have rivited it in, as it would have been a 1000 times easier, but gave me a good opertunity to give arc welding a go I know that has given no real answer for you but, thats the way i have done it Martin.
  5. CURLY, we started off in bordon i think and ended up in Aton, so all over the place 1 Lane a remember is called Water Lane which was really good. pinny, did you remove your cover then run a bead of silicone round the edge, then put the cover n seal back on? Or just put silicone round it while it was still on? cheers Martin.
  6. Allright, Ive been on the forum for a while and have had my disco about 3-4 weeks now, so thought i best post a thread up finally and introduce myself Martin, 19 from Guildford Surrey, Its a 95 300tdi 116k 3 door. I picked it from a dealer near me totally standard when i bought it. So far ive done: 31/10.50 r15 Khumo KL71's on 15" modular steelies Removed all carpet/sound deadening trimmed the front bumper removed rear bumper removed tow bar Removed EGR valve and cleaned intercooler, inlet manifold and all the pipes. It has the usuall problem of rotten boot floor, and some rust in the drivers footwell, but apart from that the rest of it is rust free Here are some pictures from last weekend when we went laning: Only problem ive got is a slight oil leak, i found that the rocker cover seal was leaking abit the other week, so i replaced the seal but it is still leaking is there a chance i may have over tightened the bolts? As i know there only meant to be something like 10nm torque? Its leaking at the back of the cover seal to be specific. Any help would be great cheers Martin.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy