COLVERT

Hi, I am doing one just right now. If you have a 90 van roof you can use that roof to fabricate the new roof. I will upload photos to show you how. You will need some aluminum welding. But not too difficult. The different from SiWhite's will be the height. The height of a van roof is some 2 or 3 inch higher than that of a truck cab. Colvert

I am trying to buy max traction suspension kit but cant find and product on their website. Seems like it changed since i last surfed their web. Any help from where i can buy them or find them?? Colvert

Hi Guys, I have an offroader with a 3.9 litre engine and a plastic fuel tank. The one used in a discovery 300tdi. My fuel pump is inside the tank. About a month ago i was offroading and smashed hard the LR three times on the side. From there on my fuel meter started reading empty and feels like the engine lacks fuel sometime. Is it possible the puel pump is effected by the sudden shock i gave? Colvert

Hi guys, i have a 3.9 litre and have lack of power when reved at 2000rpm on loads. It seems like it misfires. I changed ecu already but was the same. Changed d ignition module aswell and no change. I dont know y it is done only on 2000rpm only. Any one can help.????? Colvert

So guys the v8 is totaly standard and running with new spark plugs (NKG) and ht leads, new rotor arm. And also running on unleaded fuel. It takes about 5 minutes to work wrong when i start from cold and drive it hard. it only lasts for 5 to 7 min. I heard that it could be caused from the lambda sensors. Some body also told me that some sort of test could be done by using a resistor to give signal to the ecu. do u know the know how. Colvert

Now that the firing order is set and all injectors have been cleaned and fitted. The engine is working fine for the first 5 or 7 minutes. In these minutes it is very drivable even on high revs and high speed. Afterwards it begans to miss fire and back fire. This could be heard from the intake air manifold. There is also white smoke from the intake. The ecu water temperature is working. What could this be? Colvert

Hi mates, its been some time since i logged in last. But, i have a question for the kings to answer. If i remove the rear propshaft of my freelander does she still move and be movable. thinking of reducing tyre wear for a while. Colvert

Yes monster, its a td4. Ive seen that sensor but wasnt sure i could do that. Thanks mate ill do it and tell u the result. Colvert

Hello guys, I am new to this forum ad I am from malta. PLease to meet you all. I would like to install ta mechanical boost gauge to my Freelander YOM late 2000. I dont know where to fit the boost pipe. Any help? Colvert