DiscoHere
-
Posts
199 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by DiscoHere
-
-
What about stopping the door noise?? Anyone got any suggestions or carry out a similar job in the past??
-
Hi
Discovery 2 2003 TD5
Car horn button (right hand) had popped out and one of the brackets is broken so i cant just push it back in. Can i buy a new one and if so does it just push in. It looks like it would but being a land rover i thought i would check with your expertise
The other issue is the door stop on the driver side make a loud noise when opening and closing due to wear on the door stop and the bracket jumping near the end. Is there any easy fix on this or do i need to drill it out and put a bigger wedge in it?
-
Hi all
My ignition has been giving me trouble for the past few weeks and i took it out to see if i could fix it. I managed to get it going but the ignition barrel will need replacing in the new future.. However when reinstalling it I am left with these 2 plugs which appear to have no home?(picture 1). I don't remember them being lose when I started so I am wondering if anyone can shed some light on their home or purpose? I did think that the big white one might marry with the striped one in the 2nd photo but they do not appear to want to do so and I don't want to force it until I know..
All suggestions and comments welcome
-
Thanks for the information Teabag. But just wondering where I might get a barrel replacement? Any suggestions
Thanks
-
My 2003 ignition is stuck in place and will not move. Seems something broke inside as little metal shavings came out on the key. What is involved in replacing it? Presumably i will need a new key as well as just the barrel? Are there likely to be any issues with electronics on the key talking to the car?
All information and suggestions welcome
-
Hi
I recently had to replace the high pressure fuel line from the fuel pump in my 2003 Discovery (TD5 with 190K miles on the clock) Today I have a small leak in the top Radiator hose pipe. I think it is time for me to replace the hoses that are likely to cause problems in the future. Any advice as to what hoses I should replace and which ones do not cause problems.
-
Hi all.
Does anyone know what the sensor under the oil filter on a Disco 2 2003. TD5 engine is for. There are 2 wires coming from it (black and white) and running over the top of the gearbox and then vanishing into the invisible area there. The sensor has a yellow cover to which the wires are attached.
The reason I ask is that I was changing the oil in my Disco and saw one of the wires is unattached but there are no warning lights and the Disco is going just dandy. Any suggestions
-
Yes you can but not sure it will last. I just tightened mine down on the rubber and added extra drain outlets at the rear of the sunroof and fed them out the rear of the vehicle. Not had a leak that i have noticed since
-
It sounds like the Radio player itself is broken. Why not just replace it ??
-
Has anyone here actually recovered their headliner with material. How hard was it to do and where did you get the material and glue?
-
Hi Guys
I need to weld the inner wings of my D2. I was looking at how I might approach this task and see a number of bolts along the top of the wing. Does the wing just bolt off or it is also glued and tack welded in places? Any suggestions or advice welcome
Hugh -
Thanks lads
Hugh
-
1
-
-
Wow ......inundated with replies..Very unusual
-
Hi guys
My drivers door on my 2003 Discovery 2 will not open on fob so I am guessing the actuator is busted. Does anyone know the part number and what is involved in replacing same?
On a similar note the back door on one side will not open from inside. It seems the child lock is engaged even though is it not. Any suggestions before I start to take it apart
Thanks
Hugh
-
I have this happen a lot in my 03 Disco 2 over the years. It does exactly what you have said and continues to turn over with no start. BUT when I take the key out of the ignition and exit the vehicle (locking it) It normally starts first time on retry (once or twice I had to have a second go at it). Now why should this happen is the question....... The best answer I have come up with is the Disco brain is not recognising the key as the correct key and it should start and kicks in the immobiliser to prevent theft. By disengaging the key and presenting it again the Disco brain recognises the key and starts correctly.
Well that is what I think and unless someone else has a better explanation I am sticking with it
-
Anyone ever renewed or welded inner wings. are there patches available or do I need to fabricate them?
Hugh
-
Hi all
The compass on my mirror seems to have given up the ghost. It is now only showing 100 rather than the direction of travel. Any idea where I look to fix it
2003 Disco 2 TD5 Auto
Hugh
-
No one?
-
I am going to remove the EGR valve on my 2003 TD5 as soon as the part arrives in the post. A couple of quick questions for you who have already undertaken this job
I have the unit with the EGR cooler bolted to the front of the engine and with the 2 vacuum pipes. Can i get away with only sealing one end of the cooler rather than taking the metal pipe from the Exhaust manifold and blanking it there and on the entry to the cooler. Alternatively can I remove the cooler fully and join the flow and return water pipes?
Thanks
Hugh
-
I have now managed to take it off and replace it and it appears to be working fine. I ended up cutting a hole in a 14mm ring spanner so as to get access over the pipe and to break the original seal on the pipe nut. I cut the other end off the spanner and in the end it measured approx 2 inches long at max. I then ground the other end down to a fragile and thin AF spanner so as to get access to the nut thereafter, I found putting it back on easier as i could move the pipe itself to assist in tightening the nut.
All told one of the worst jobs i have ever undertaken on the engine.
I did have to take the EGR off to get at it all
Hugh
-
Hi all you wonderful inventive people out there
I have to replace the top pipe on my fuel pressure regulator in my TD5. To get at the nut at the front of the engine looks like an impossible task without taking the inlet manifold off or at least dropping the Alternator or making a special tool. Can any of you who have already done this let me know what you did and how it worked.
I did read on here that it has been accomplished by grinding down a socket but i am afraid i am not sure what that might look like. Suggestions and picture would be great
Thanks
Hugh
-
Brilliant replies. Thanks for the heads up. It is as I thought so thanks again
Hugh
-
Ascetics or is there a real function?
-
When i got my TD5 a few years ago i had a similar problem and it turned out to be the fly by wire connection between the accelerator pedal and the ECU in the engine. All fine following replacement of the pedal. Might be worth looking at if all else fails
Hugh
Car horn and door stop noise
in Discovery Forum
Posted
Ok i have to replace the entire part as the buttons i ordered on the internet are pure carp and a waste of time and money. They disintegrated as I tried to put them in.
Now my question is do i need to do anything in particular when removing the cover which i presume houses the air bag? Is it just a case of removing it and replacing the horn loom and then replacing the cover???