thanks mate its looking that way
when i turn ignition on the hill desent light is green then goes out as it sould
tc and abs are still on
the hill decent works as it should
but when i go over 10mph the hill decent light goes amber and stays on
also when i go down the road and jam the brakes on the abs is working
ian
hi
ive just done my nsf wheel bearing and wrote off the abs sensor in doing it
(a dear lesson lernt) £90 later i fited the new sensor and set it with a 0.050mm feeler gauge
it was tight on the feeler not a nice slide feel but the three lights on my dash still havnt gone out
1/ do they need resetting
2/ could my abs be working but they need resetting
3/ could the sensor be dudd
someone please help me its starting to worry me i use the freeby off road in the winter a bit and
the hill desent is great for getting out of stickydeepish mud
cheers wabbit
hi every body wabbit here im new so a big hello
ive just rebiuld my nsf hub (changed bearings)
i noticed one of the brake sliders was seized solid
it took a big slide hammer and some time to free it
but it cleaned up ok and with a lot of copper slip when going back it works fine
while going through the different 4x4 sites i noticed they sell new for about £7 a set of four
best of luck to every one!!!!