Jump to content

clem

Settled In
  • Posts

    23
  • Joined

  • Last visited

Reputation

0 Neutral
  1. how will the 300tdi pedal box make a difference whats changed?
  2. thanks for that but could it possibly be an hydrolics prob.
  3. hi guys. i replaced my defender 90 clutch complete with fork a few months ago & its still very stiff when pressing down the pedal to change gear.Also the biting point is changing when releasing the clutch now.There didn't look to be any thing wrong with the old one either when it was removed.
  4. Thanks for all ur tips going to give it a run this morning & warm the block.Will give it a go with a screw extracter if it wont come then i will just bypass the wiring to this plug. Cheers
  5. Well now ive gone an done it.that 5min job replacing a simple glow plug in 200tdi engine and its SNAPPED! Any advice on removing the rest of the plug would be helpful.Going to try a stud extracter but its tight.Feel like taking a hammer to the engine but i will hold off for now.
  6. Hi guys my fuel pump looks to have started leaking from were it is mounted to the timing casting.Fuel looks to be seeping out slowly from some ware & dripping off the bottom of the timing cover onto the front axil. Could it just be the gasket or something more expensive.Any advice & tips would be brill no matter how small.Not a happy chap just replaced the clutch now could have to spend more hard cash. forgot to mention its a Defender 200 tdi L93.
  7. Thanks for replying so soon. Are you saying knock the seal & needle bearing & bronze bush all out in a one ha cos the bearing needs to come out before the seal & bronze bush before the bearing. sorry if i'm being a pain. Would this seal cause oil to seep forward into the hub bearings & out onto the wheel itself or cauld it be that the hub oil seal my only need replacing.
  8. thanks guys just checked the thread on front hub overhall but no mension of replacing the bearing & oil seal fitted inside the stub axil please helppppppp
  9. hello everyone i need some advice on removing the oil seal from the front stub axil so it can be changed on my L 93 defenfer.Reason i am doing this is because of oil leaking out from the spline ware the dust cover fits.Am i looking to far indepth cauld it just be the hub seal.any advice would be brill. Thanks ones again steve.
  10. hello people,i have play on my steering box and someone suggested centralizing it,anybody now how to go about this.
  11. hi i recently fitted a second hand steeering box to my 200tdi defender.Since fitting i have free play on the spline which comes out of the box,quater turn either way before movement on wheels is noticed. tried srewing in the adjuster on the top which makes the steering stiffer but does nothing for the free play.Any other alterations which i can make or is it badly worn.Reason for changing was the other leaked but steering was perfect. Any advice please would be very helpfull Thanks..
  12. Thanks for all the advice a friend had a LR gauge spare so i fitted this in the end & now after 10mins of running about the gauge reads half way.Never moves from half way but at least i now it works.
  13. just found this hopeit helps http://www.modworld.1st-hosting.co.uk/cata...2b3f0a3dbc82ebe
  14. changed the stat also m8 fitted a 91 deg so it runs warmer,what should the original stat open at any way.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy