Jump to content

neildon

Settled In
  • Posts

    80
  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Location
    Lower Benefield, Nr Peterborough

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. the engine is good on mine, cambelts have been done and its a new rebuild on the engine, i was considering swapping the whole car, not the engine but after consideration the economy isnt massively different, from people ive spoke to recently, i really like the car but at £1.30 a litre and climbing its getting difficult to warrant the expense, unusual for me as im normally a firm believer of....when it runs out, fill it up again.....but the frequency seems to be getting serious. Looks like i will be keeping it after all and will persevere with the cost. Neil.
  2. thanks for that, ive never been impressed by the power on the v6 but i am hugely unimpressed by the consumption...it really devours fuel likes its free!!!!
  3. Hi all, I am running a 2.5 v6 and wondered if anyone knows how drastic the fuel consumption is between that and a standard 1.8i. As prices for fuel soar i am considering swapping, i dont need the extra power so a 1.8 would be fine but if the consumption is not much different (though i suspect it is)then there is no point changing. many thanks neil.
  4. Hi.... just been asked if the bearmach 2" lift springs i have taken off my 90 will fit a 95 Discovery.....can anybody advise please many thanks neil.
  5. thanks guys......nice to know its not a massively technical issue thanks everyone
  6. Hi Nick, Thanks, thats a great help...I'll get that sorted as it sounds simple enough. regards Neil.
  7. hi all.... i apologise if this has been covered and i suspect it has, (i have tried searching but cant find anything, i imagine im not typing in the right parameters). i have a 2001 v6 and it has been fine, last day or two the TC and HDC amber lights have come on together occassionaly when braking. at first I assumed it was genuinely the TC notifying me it was operating (due to snow and ice)but with the HDC on as well i wondered if there is an issue. any information would be greatly received many thanks Neil
  8. Like I said...Im starting to think its just me as most people think its ok, only one other person has ever really commented on it but it seems a big lean to me. No brackets etc so ARB may not be the way forward. Possibly polybush could be a solution....thats been advised several times, only thing putting me off is the actual extraction of the old bush. Does anybody know if there is one of those idiots guide to polybush replacement on here somewhere...with pics as a preference???
  9. de Carbons were put on last year, whole set up was done at the same time so its not done any serious stuff, bit of off raoding earlier this year for the Mac 4x4 but nothing strenuous....im thinking its just my view on the set up and its probably fine, I just dont like the way it leans on bends and roundabouts but I also think some of it is the lift. Forgive my ignorance but are the ARB's front and rear??? Hard to fit???
  10. thanks very much for that.....didnt realise they were different each side....
  11. Thanks for that, Ive thought about the Poly bush side and spoke to quite a few people about it and never seem to to get a definitive answer, some say its a big difference and others say its the springs....I was hoping it was the springs as its lots cheaper to put right and I can change the springs, i will have to have the garage do the bushes. thanks for your advice though, it might be the way forward after all.
  12. Hi All I am permanently unhappy about my springs on my 90. I had a 2" lift done when I replaced all my springs and shocks (about July time last year and only done around 1500 miles since) and since then have never been happy about the roll that has come with it. Originally the springs were Bearmach (Blue) 2" lift springs but I then upgraded the rears to Terrafirma Heavy Duty 2" lift, but im still not happy about it. I am considering reverting back to standard ride height but with firmer springs. I went out in a friends 90 and it didnt seem to move at all round the bends, stayed completely stable. So...the question... Is there such a thing as heavy duty / firm standard height springs for front and rear of a defender 90 and if so...where from? Thanks very much.
  13. thank you all, its how i thought but im glad i got confirmation. im aware it will drive a bit pants but its just to see if different springs on the front stop me feeling like jonah inside his whale when cornering. thank you all, i'll give it a go. (if it stops raining) neil.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy