Mo Murphy

Nice one Steve Mo

Nice site, Dave ! And a nice quick server too Mo

Thanks guys but why would you need to switch the negative side of a circuit as well ? What sort of things would you work like that. No wonder it's called electrickery ! Mo

What does this double pole, single pole, double throw or single throw all mean with regard to switches as I'm simple and can't work it out. Mo

I got one too I think I'll go back in October time as the other forum trip will keep me busy for a while Mo

Oops ! Mo

Read all about it ! Mo

I used penny washers to make toggles for my net, the elastic has to get over these to come off, which it hasn't yet Mo

Adam, I went back as far as I could reach and replaced the wire from there. Luckily the break must have been in the section I cut out as the problem was eliminated and I didn't have to do any more. Had that not resolved the problem then I would have run a new wire from an ignition switched live. It seems to be a pretty harsh environment for a wire to live in and I noticed that the insulation had hardened and that some cracks had appeared so I sleeved the new wire and then put some plastic cable armour on the outside of it to protect it from the environment. Mo

I had similar problems, Adam. I replaced the fuel solenoid wire back as far as I could see it and that cured the problem. HTH Mo

A complete waste of time but I've done it anyway. Mo

Not only is there THE mask emoticom but you can also "Insert special item" . Are you working for Barrymore now, Trev ? Mo No, really m8, I don't fancy a swim, thanks all the same ........

Mine was 99p on Ebay Mo

It's there Paul, just moved further back Mo

Good write up Pete, useful to know that the two downpipes are interchangable. Mo

Only if you have turned your mug of fancy coffee upside-down Mo Bugger, where's me coat ..............

Mine is 8mm made by Mr. Wightman. Mine has replaced my front x-member so I suppose the extra thickness is warranted. I'll see if I can find a piccy. Mo

I cancelled my subscription after the old forum affair. Whilst most of the LR mags are similar LRE is the poor relation in terms of quality and content and my subscription was in return for their provision of the forum that most of us frequented. Take away the forum and you're just left with a poor LR Mag - No thanks. Mo

I think greedy Greeny may have engineered his own demise by moving to Kelmarsh.... shame Mo

Should be fine with that header tank John, mines had one with the 300 for 10 years. They don't split either Mo

Leave it bare Trev, it looks much nicer Mo

i like the metal ones because when you break a pipe spigot off, you can solder it back on. Don't ask how I know Mo

Buggers ! I'll keep an eye open round here. Mo

Good luck in Romania Paul, you should have the place to yourself after they join the EU Mo

Steady, Mark, steady ! Mo