paulsfj

Hi i have a 96 300tdi es auto and i need to change the bushis but which ones should i put poly ones on or standard ones , do the poly ones give a hard ride , andy advise please

hello mate have a read here http://www.landyzone.co.uk/lz/f8/changing-my-chassis-yey-162576.html

hello sorry to jump in but what support bearing, iv done my doughnut but whats this bearing

Hi and thanks for youe advice when you say fron uj do you mean the front prop or the front end on the rear prop ??

Hi all yet another question I think i need new uj's and maybe all the bits on the front as I'm getting a vibration and a noise like a worn bearing , so I'm thinking start with the uj's and going from there. i have a 2" lift and i think this was the start off the problem , iv ordered a new set off standard springs to replace, and wares the best place to get them from any help would be appreciated

Ok that's what I though as long as there not any thing wrong Thanks

As an new landy owner i'm not sure how loud they usually are but my N Reg 300TDI AUTO makes quite a lot of noise when the engine is pulling, the same through the gears/rev range. In neutral and even when freewheeling in gear it isn't much different to a regular car. I know you are sitting on the gearbox in a landy and the gear stick skirt isn't much of a noise absorber but should a landy be noisy when the engine/gearbox is doing work?

Hi all i have a discovery 300tdi es which i have not long had the problem I'm having is when driving i get a not to loud noise when i hit about 50+,if i take it out off gear and fee wheel its not there, could this be the transfer box or auto-box or some thing els Any Help Please

Hi and thanks for all off your addvice, well i have just got myself a discovery 300tid es auto 1996 with lfsh a 2" lift and new shocks 4 new tyres all welding done new mot and 6 m tax im like a pig in #hit at the moment just waiting to get out and about

Ok thanks all , any thing i should look out for

Hi all need a bit of advise i wont to get a discovery but witch one ,i only wont to spend about £1000-1500 so this will be a 95-96 witch is ok i don't mind a bit off work, i can weld and handy with a spanner , but witch one a 300tdi or a 200tdi ?????

Please Please can any one Help with my problem

Hi all I think i have buggerd it up, i dont have any power now,i took the egr off and cleaned it witch was all ok put back on all ok, but i can't seem to get the pipe to solinoid back on could this be the problem ??????????????

Hi All ok i have cleand the egr witch was full off muck,it wasent open it closed but when i took it off i cant seem to find ware the little pipe gos to ?? will this matter as im going to block it any way ??

Thanks for your replys the car gets seviesd when needid all fillters can you tell me ware the egr is and the Turbo VNT actuator sorry about this but any help will be most appreciated

Hi all Can you help I have a TD4 ES year 2000 with 101,236 miles the problem im haveing is im only getting about 20 mpg and i think i should be getting around 35-40 can any one help Please

Thanks for that ,that looks like it will do the trick Thanks Paul

i am refitting my alternator but I'm not sure how to route the belts. Anyone got a diagram? Thanks.

the rear window motor had to changed so i surpos that could have done it ????

Hi All I have a td4 and i wont HELP with the rear door I CANT STOP THE PIGGING THING FROM LEAKING so please any one no the best way of stopping it HelPPPPPPPPPPPPPPPPPPPPPPPPP

ok thanks for that it helps a lott

Hi All i'm new to all this and i would like your Help Please Ive been offerd a range rover 35 F reg SE , its been sitting on his drive for just over a year it starts up and runs but it seems that the choke is stuk on , it needs a exhaust and a mot as to rust its not to bad sills all ok , i just need no how much its worth, it has just over 62k and 3 owners. Can you help and is it worth spending time and money on ????? Paul

Hi all can any one tell me ware the camsharft sensor is and what it looks like ,is it an electrical part or mechanical one Paul

ware,s the best place to get parts from and not at dealer pricees