Jump to content

wettstuff

Settled In
  • Posts

    37
  • Joined

  • Last visited

Everything posted by wettstuff

  1. Hi Mikey, i had thought of thatbut to be honest i really doubt i shall ever lock it, it was just more of a gripe as if i was selling them as a combination i'd give the option for matching locks, only nit picking though because everything else is spot on Mark
  2. Well as promised picked up my tool chest combo today, first impresions are good, well packaged, good qaulity finish and the drawers are smooooth. As it comes First job rip open the biggest box and stick the coasters on Then repeat as neccesary with the other two boxes and stick it all on top of each other Didn't have much time to play with it as got wind the misses was on her way back, best not get caught at the moment i thinks Did manage to put a couple of trays in though Hopefully going to get out tomorrow and star filling up it up Very happy with it so far, only issue i can see is that there are 3 different keys, having said that it will probably never be locked Mark
  3. Couldn't resist this, been looking at tool chests on ebay for a while now, but nothing comes close to the price of this, bottom roller cabinets were looking to be about the same price, probably should have gone to look at one first but a few mates have halfords chests and they're happy with them. Going to pick it up in the morning will post pics and first thoughts tomorrow
  4. The ratchet looks identical to a bahco ratchet i've got albeit in blue instead of orange. Ordered one anyway, like Jason says for £15 delivered you can't really complain Mark
  5. mmgemini how about cam straps? http://www.amazon.co.uk/dp/B004ODP8YC/ref=asc_df_B004ODP8YC11113239?smid=A1EJNN7CY5N1PK&tag=googlecouk06-21&linkCode=asn&creative=22218&creativeASIN=B004ODP8YC not connected to these just the first site google came up with i use them for light loads on the works pick up and vans, Holding cement mixers, barrows, mowers, ladders, all sorts of stuff. Mark
  6. Meatslicer knew i wasn't day dreaming this popped up on another forum, can only find a picture at the moment but its been widened http://www.lro.com/forum3/viewtopic.php?f=43&t=81714 and original source although it seems not to be a direct link anymore Mark
  7. Mark, they normally have a decent thick spreader plate behind them to help prevent them pulling through, i dont think the thickness of metal on the bumper is enough, hopefully someone will either confirm or deny this soon Mark
  8. It has been done to a 110 too, i remember seeing it on (i believe) the old forum or very early on on this one , Having said that it could have been lro. They had done exactly as has been said to the panels, cut down the middle and add a bit, bigger windscreen with 3 wiper arms on and if think it had custom axles and running gear too. I hope i saw it somewhere and haven't lost the plot. Iceland seems to ring a bell too (no not the shop) Mark
  9. Disco ron, i think the chap your thinking about is raptor engineering, he does a plate to go in the side of the seatbox and a modified battery strap too Mark (no connection)
  10. Thanks for the replies chaps, Pete300 just about to try what you suggested (fingers crossed) Dave i take it this i due to me putting excess strain on the gearbox? any idea what a new/decent secondhand transfer case might be? or the splines on the shaft? Mark
  11. Hello chaps I'm new to range rover owning, having just bought a 4.6 V8 hse auto, absolutely stunning vehicle, unlike anything i;ve ever driven.#Drove back from Berkshire to Mid Wales yesterday no problems at all However last night after supper and maybe a bit to much wine i had to move it further down the drive to allow my girlfiend to get out. As far as i can remember i did everything right(nothing to go wrong he says) But for some reason i know no longer have and drive in hi or lo backwards or forwards. Now i dont remeber taking the handbrake off(stupid moment) but could this have bent, broken or twisted something, are the gearbow and handbrake connected in anyway? Also when the auto selctor is put into park there is a very horrible whirring/grinding noise Any help you guys can give me is greatly recieved PS: Just to add its my own drive on private land and no public roads where harmed during this adventure and i know i shouldn't have been shouldn't drive under the influence) Many thanks Mark
  12. Sorry to hear that chap, there are two independent landrover garages near where you are. Safari Engineering in Eversley, not had any work done there but i have dealt with them for parts and advice, nice chaps. The other is Nick Kerner in winkfield never used them just know about them, good reports on their work but can be a bit pricey from what i've heard. Safari Engineering 0118 973 2732 Nick Kerner 01344 885222 No real connections with either just trying to offer some help Mark
  13. Hi brian, i've replaced the wheel bearing several times on the passenger side and had it done twice by "proper" mechanics although before say 1500 miles there is a smear of oil appearing on the alloy, but only the passenger side, i haven't looked at the drivers side. Mark
  14. Evening chaps, with a bit of luck someon might be able to help and confirm my thoughts. My 110 ht 300tdi has now chomped its way through two sets of rear tyres this year (maybe 15000 miles) but not totally only the inside of the rears, quite literally half the tyre is nearly bald while the outer edge is still brand new Now is this due to suspesion bushes like i think or something more serious. I do tend to run with loads of fencing/ building tools and equipment all the time, don't very often tow and never go far when i do. Oh the tyres are colway enduro 265/75 16's, i quess i should have started looking after the first set but just put it down to bad luck Cheers Mark If it helps i can get a picture up tomorrow
  15. Jim, it didn't quite explode just a tiny tiny crack in the seem, got a new one from safari engineering in the end saturday, Seems ok so far Mark
  16. Evening all chaps Driving my 300tdi 110 tonight the expansion tank decided to go bang. Now providing i can get a replacement first thing in the morning is it just a simple task of swapping over and just topping up with water/antifreeze?(if so how much of each part) Looking at the puddle that formed it didn't seem like a vast amount of water. Will there be any need to drain/bleed the system Thanks in adavance Mark PS: Does anyone in berkshire has a spare 300tdi expansion tank in exchange for some beer tokens
  17. I reckon i can get anywhere between 300 and 450 miles from my 110 ht 300tdi. Havin said that the fuel gauge happily bounces around between full and half regardless of how much is in it. So i don;t trust that and i'm pretty sure i've never seen a fuel light. I brim it at the pump and then reset the trip/mileage counter and normally fill up again at 300 miles, somethimes its £50 sometimes its as much as £80 Only once forgot to fill up at 300 but thats the day i managed 450 although driven with kid gloves on i must admit Mark
  18. Just watching bbc breakfast and they've got a chap from the aa who recomends putting meths in the washer bottle. I recently bought 10 litres of screenwash from a pound shop in aberystwyth (unbranded as far as i can remember) and so far its been spot on, having said that the spray from my washers on the 110 have a job reaching the screen let alone freezing on it Mark
  19. Si nice idea, where did you get the heater from i've been looking for a while tonight but can't find anything remote controlled for anywhere near a tenner Mark
  20. Thanks guys, i quite fancy having a crawl around one just to see it close up Mark
  21. Just as an aside to this, does anyone know what happened to the film model of both of them if i remember right, did one end up at dunsfold or in private hands? Sorry fot he hi-jack Mark
  22. Sorry to hear this, i know how you feel, my 110 got nicked recently off the drive when it was found it was missing thw winch bumper. Scum doesn't sum up what i thought of them Mark
  23. rtbarton Thanks for the reply i sort of figured as much Mark
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy