garrygun
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by garrygun
-
couple of piccys, it is not taxed. http://s195.photobucket.com/albums/z56/gar...rrent=IMG-1.jpg http://s195.photobucket.com/albums/z56/gar...nt=IMG_0001.jpg
-
I have one of these with mot, how much is it worth, fair cond, diesel ,new starter motor,battery, glow plug conversion.starts perfectly in cold mornings, just need a rough idea. garry
-
I dont know how to thank you guys enough, very good info thats great. cheers,Garry.
-
Whats the cheapest &easiest way to convert to power steering & will it cure the sloppy steering? Thanks guys for any replies. Cheers, Garry.
-
Hi guys, i fitted this glo plug conversion kit to my 88 ser11, i bought from Paddocks best £25 ive spent for ages 15 seconds pre heat & she starts even in this cold snow. thanks for the advice every one, Regards Garry.
-
Thanks Phil, i will get in touch with them asap. cheers Garry.
-
Hi John, ive tried to locate some modded heater plugs,tried few suppliers just drawn a blanc. would you know of a supplier that could help? regards Garry.l
-
Thanks John, i think i will try later plugs dont realy rate these early type. cheers Garry.
-
Hi guys, ser 2b diesel could sombody tell me what voltage i should get from the resistor that supplies heater plugs from 1 to 4 should this decrease from plug to plug?? thanks in advance for your knowlege guys. Cheers Garry.
-
I have taken note of every tip which il try, thanks guys, Garry
-
I think your right, i was just hoping that there might be some other cure or conversion, i spoke to two other guys with series11s today theyve same symtoms done everthing but still same, think ill have to grin&bear it. if someone has managed to sort this out it would be nice to share your findings. thanks for your replies Garry.
-
Ive done all usual checks &replaced ball joints but still same,steering is easy no tight spots,get 45 mph your constantly correcting. Forggot to say its 88 ser 11a ish 1970. thanks for reply, Garry.
-
Hi guys, is there anything you can do to the steering to stop over correcting? ive adjusted steer box but still same, any conversions? cheers Garry.
-
Thanks for the info, problem i have its pushed to one side as wellas inward. Cheers Garry. ps just printed this out, exactly what i needed.
-
Did you use cutting grease or tallow when you flared pipes? if you didnt try, it it gives you smoother finish. Garry.
-
Hi guys, im new to this forum im hoping you could help me out, i have damaged o/s front spring hanger chasis, i was going to weld new section in but dont know dimensions to work from, is there somewhere i could download info from? or if some kind person could help. thanks, garry.