Jump to content

CBolton

Settled In
  • Posts

    73
  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Location
    Surrey
  1. Hi, can someone please do me a favour, I need a pic from underneath a 200tdi of the route the handbrake cable takes around the gearbox and transfer box, I had both dropped to change the clutch and I must have it coiled wrong now as it rattles off the tunnel, and can't think the route it took
  2. Hi Can you get the 3 fixings new for the washer bottle from a 200tdi Disco First one sheared and the other 2 are going the same way...
  3. lol if it makes you feel any better I ended up removing it a month later when my mates full stainless system became available lol
  4. tbh I bought both as it was only like £50 and I couldn't get any answers about fitting it on a 200tdi......
  5. I did the same...bought a centre replacement plus rear box for my 200tdi...all I had to do was use 2 bolts to join the front to the down pipe..
  6. I have had the viscous and shroud removed from my 200tdi for nearly a year..plus I'm running more boost and turned up pump...ran in traffic in hot weather with no problem...its not a hot running engine...only once offoading have I wanted a leccy fan and that was winching though bloody deep mud...
  7. ...right ok stub is off and swivel cleaned right out...also diff emptied incase of water ingress or incorrect oil level...breather hose will be sorted next month as fitting extended breathers all round.. ....still not sure how much to replace....so firstly as I have never seen the back of a stub before....the bearing looks good...but is there meant to be a seal visible or is it part of bearing bit ??
  8. thanks for the help guys....will check n replace the seal in the stub...
  9. Hi all I had a problem with oil or grease on the inside of my front brake disc....I cleaned it, it came back...so stripped down front hub stub and back of hub were a mess I cleaned all up, completely cleaned bearings and fitted a new seal on back of hub, filled swivel with lucas hub oil.....after driving again got trail on front disc again...cleaned disc...came back found this when i took off the end cap the bearings were completely contaminated again...seemed to come through nose of stub I stripped it all...thoroughly cleaned the bearings, this topped up with one shot swivel grease overnight it seems the problem has revelaed itself... oil/grease is leaking out from the stub....so is this a knackered swivel ? will it need a rebuild ? if I leave it i assume I will get the same problem with the leak then contaminating the bearings ?
  10. does anyone know if the 2 centre vents in a 200 Disco can be removed ?? the ones that are above the heater controls I want to mount something to the dash top next to the instrument binnacle but dont know if I can screw down as all I can see is pipes when I look from the side...any idea anyone ?
  11. thats why I'm asking.....I don't know.....
  12. Hi all...is there a difference in the exhaust between a 200tdi and 300tdi,,,,,obviously yes for front pipe...but centre and rear silencer boxes ??? ...basically if i bought through pipe and rear box listed for a 300 tdi will it fit my 200tdi ok ??
  13. ...second here....done everything so far...great tool !
  14. first thing I would check would be your thermostat
  15. Hi...started changing mysuspension for a 2" lift...on removing the spring I noticed that the hole in the middle of the spring seat had become tear drop shaped....should I replace the seat ?
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy