jasonf

hi all i have a modified 110 with a isuzu 2.8 who would be a good bet to insure it with ? all the best and happy holidays

all sorted steady as a rock thanks fellas

thanks guys just swapped them over will keep you posted j

great cheers pal will do

after swapping my 2.5 n/a ex mod engine for a 2.8 isuzu the temp guage rises steadily to the end of the read within minutes of running, now the heater pipes get warm but the engine seems cool ,i can rest my hand on the stat houseing when the quage shows red hot and the rad pipes are cool and the expansion bottle cool is it a temp sensor difference between the LR engine and the isuzu ie resitence factors very odd what ever it is thanks jason

hi all my zf22hp4 box runs fine without a kickdown cable but with it attached it clonks and does its own thing ,can you run it without the cable or do you need it for some thing other than the kick down? also anyone got a system for setting the kickdown up? cheers jx

hi there finally nearly almost there with the 110 mod def to an 2.8 tdi isuzu however is there a trick to getting the altenator to charge the batt or does anyone have the wiring diagram i can look at . thanks jason

not you my man not you xx

thanks for that all done now thank you for not getting shirty like the other forum j

yes its me again!!!! when i fit my convertor to the gearbox is it just a case of slipping it on all the way or am i looking for some kind of locking noise thanks again jason

i went for 30mm spacers out of billet for mine only time will tell they give you a better turn circle as a benifit

after getting my replacement box i found the tourqe convertor hanging on the shaft in transit now i think its ok but just a bit nervous after losing one box so the zf hp4-22 box is there ment to be a little play on the centre shaft as it goes into the box shaft and is there any way of testing the pump before i sling it back on thanks jason

yes paul that looks like the baby its an isuzu 4jb mounted to a zf 4hp22 auto box god knows if the torque and flex plate are lr or isuzu thou

thanks for that western but keeps sending me to another site !!

hi its the 2.8 isuzu 2.8 tdi lump

paul i wonder if you can help with this after taking my torque convertor off the flywheel off my 4jb i have found the circular spacer behind the convertor to have snapped off round one of the mount bolt holes is there a part num for this item? or is a made up part its about 12 inch,s diameter and 2-3mm thick thanks jason

after taking my torque convertor off the flywheel off my 4jb i have found the circular spacer behind the convertor to have snapped off round one of the mount bolt holes is there a part num for this item? or is a made up part its about 12 inch,s diameter and 2-3mm thick thanks jason

ta Paul

anyone know how tight my torque bolts to the flywheel should be on an isuzu

can i have it please xxx

thanks les my engine is the isuzu 2.8 so i guess the startermotor is my way in ( i hope so) thanks again j

hi Les sorry to be a nuisence but can you just go into detail on this point With the autobox fitted to the engine, check that the converter will rotate freely and has a small amount (about 2mm) of end float. Bolt the converter to the flex plate using loctite or similar. 1 end float ? 2 how do you bolt with gearbox in way? thanks again Jason

hi les the box and engine where joined and i took them out together but split them on a bench the convertor stayed on the engine then i put the gearbox in the defender first then mated the engine back to it makeing sure the shaft of the box hit the centre of the converter , but it seems a bit more complex than this so reall i need to (whip!) off the box and check what damage ive done

i lined the box up with the convertor and pushed the 2 together making sure the shaft went in the middle of the conv then nipped the bell bolts till they came together then about 10mm apart there was a loud clunk then they came together like butter?

damm would a loud clunk sound like a damaged pump when i bolted it together a loud clunk came when the box came to the bellhousing what you reckon?