dazwell24

hi guys im looking for a uk dealer for mega squirt can you please help me

I have done this & they do rub badly on the road & have ripped off 2 brows285/75/16 with 30mm spacers they dont tuch the chassis or body just catch bably on the wheel arch brows hope this helps

Please can I have it I want my money back I'm from Gloucester but don't fancy kicking off in the yard with CCTV around many thanks dazwell24

Bloody hell wish I read this Becore last week rang and paid for seatbox which has not been sent they wont give me a tracking number which means its not been sent and have blocked my call wud very much like to go and visit Edward at his home address if anyone has it many thanks dazwell24

I use memory map app on iPad then just record the routes as you go done strata today didn't loose signal at all yet had no phone signal but still picked up gps cords fine and it plotted to within 10 to 15 feet so I'm happy with it HTH

i may blow up it may not its only 45 more horses then the vnt kit can give you on the 300tdi that M&d give you on the tgv kit worst case wud be melt down but will see i have currently already built a bmw 325 turbo using a hoslet hx55 that runs at 449hp proven by aject racing and heres dyno run no internal mods to the engine apart from lowing compression and cutom building manifold

thanks guys have started to make one up in work didnt really want to make one lol i have already butchered my manifold for the flange thanks for replys i want 200 horse out of it. if it goes bang then so be it'll be a td5 lump going in

unfortunately the flange faces down and the would not be enough room for turbo in such a low place with intake pipe and exhaust really need turbo to be level or top mount postion but thanks for reply didn't think of that of the 200 manifold

hi guys and gals im looking for a manifold that will allow me to fit a 4bolt turbo to my truck or worst case at least a 3bolt please help guys thanks some thing like the manifold in the mdengineering kit http://cgi.ebay.co.uk/300-Tdi-VNT-TURBO-POWER-IMPROVEMENT-KIT-stage1-/170332644467?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27a89de473#ht_789wt_1029 dazwell24

mine has also gone down fridge lancaster have dropped it by nearly 80quid i was gob smacked the wifes insurance on her new 3 series has gone up by 238quid its a very mad world she has no points no accidents

http://www.innotecworld.com linky http://www.innotecworld.com/t-video_deblock.aspx

yes above is also true but do your self a faveor and get some D-Block from a company called inotec we use this all the time in the workshop and it never fails on manifold studs i swear by it its about 8quid a can but worth every penny

if you are mechanically minded it is a very simple job on a 300 litterly unbolt manifold and bolt new turbo and manifold back to the block attach pipes and oli feed and drain <<<<simples>>>>

hi there mate you are able to have the tyre repaired its wats called in the trade MAJOR repair we do these all the time for commercial plant and car tyres you just need to find a local commercial and car tyre specialist here in uk, cost about 25pounds and is fully legal and insurance approved i know that the trucks we repair under truck force which is owned by goodyear-dunlop go through european tests ok id say look into it dont just scrap the tyre HTH dazwell24