Jump to content

gonk69

Getting Comfortable
  • Posts

    6
  • Joined

  • Last visited

Reputation

0 Neutral
  1. guys im sorry for the confusion it is the oil pressure relief valve that is stuc k i believe as that is what people at the landrover garage and the haynes manual tell me, apparently the timing belt housing has to be removed, sorry bout getting it wrong, cheers matt
  2. hi guys and girls, i am in need of some help please my oil light is on permanently so been told its the oil pressure switch, is there anybody out there local to ipswich suffolk who would be kind enough to come and help me fix my baby, i would happily pay for your time with a big hug when she is fixed,lol,no seroiusly im not confident enough to do it myself and i really need her back, thanks for looking, fingers crossed, cheers matt
  3. sorry its a 300 tdi on a n plate, cheers matt
  4. hi fella there were no noises just seemed to pull back the as i changed gear it stalled i pulled over the oil does smell a bit cooked, is an oil pump strainer change a difficult job fella?, cheers matt
  5. hi guys driving my disco today the oil light came on and about ten mins later i lost some power went to change down and she stalled, looked at the oil level looks ok but on removall of the oil filler cap it was a bit smokey and the oil smelt a bit burnt to me, any ideas please peeps, cheers matt
  6. hi guys and girls, well finally i have fixed my car, i have a 96(n) 300 tdi and i love her dearly, anyway my problem was the wastegate pushrod was not connected to the plate on the exhaust manifold, was hoping that it was just in need of a new circlip, but no i just aint that lucky the nib that the pushrod fixes to had sheared off, so after a few phone calls to a few shops and suppliers was told that it would most probably be a new manifold and turbo, ooouch, well after a few depressing hours out cam my torch and spanners to see if i could bodge it, i removed the inlet manifold and the exhaust manifold, what i decided to do was make the hole in the pushrod wider to 8mm then drill a corresponding 8mm hole in the plate on the manifold, droped in a bolt with a washer each side and a locking nut and reasembled my beautifull girl, all back together and with my backside cheeks very firmly cleanched i started her up, sounded lovely, anyway took her for a test drive and hey presto she is running like a dream, i am one seriously happy boy, sorry for babbling on, but had to tell someone,lol cheers matt
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy