I don’t suppose anyone has the images from this post? I’m struggling get get my valve and idle working nicely.
Alternatively, can anyone share their settings. I have a standard 3.9 with Nige’s kit bolted on.
Thanks
David
Dailysleaze, thanks for posting the photos.
It would be good if these could somehow get linked back the technical archive post to make that thread useful again?
Fair point....
This is the one I bought
http://www.ebay.co.uk/itm/221476401897?_trksid=p2057872.m2749.l2649&var=520339152594&ssPageName=STRK%3AMEBIDX%3AIT
The seller is called autosiliconehoses_outlet
Hopefully the attached photo will work and show how I've just got around a similar problem.
The bend after the the manifold is a reducer from Ebay for about £20. The supplier seems to have pretty much every combination going.
All the best.
David
I had a single with a 200tdi but have swapped to a double fan for the v8 as it probably moves more air and actually seems to be shallower in the engine bay.
My Ebay Ebay link didn't work but they are mark 3 mondeos. Just cut the legs off and they fit well.
I've installed the seat box ends and battery box from YRM on my 90.
I think it helps to do one end at a time to stop the whole thing going floppy.
I did the joints with sikaflex and rivets so it's strong and waterproof.
Overall it's a great repair/mod and I simply don't understand why they didn't make them like this to start with.
D,
I've spent a lot there while rebuilding my 90 and generally prices and delivery and great.
It's just when you have a problem or need a return a part it all goes wrong.
My galvanised bulkhead has holes as you mention at the bottom of the a pillars. In theory it will be galvanised inside although I filled the hole up with sikaflex before sticking the gasket down.
David
My D3 is insured through Tesco. I've not claimed from them yet so have no idea how them will perform.
They couldn't cope with the Defender due to it being non standard so that is insured with Flux.
I've just had two of the galv doors from SP delivered. They're not painted yet but look good quality.
Looks like I will need to make a bracket to hold the bottom of the winder mechanism which is a bit annoying but given the price compared to second hand on eBay and the fact that they will last, they seem good to me.
Service from SP was good.
David