-morten-

hi, okidok, thanks for the reply anyway, i'll just continue to live in ignorence then. regards -morten-

no, just wanted to know more than top torque/rpm and top hp/rpm. if the curves were flat or steap, things like that. regards -morten-

yes, that is what i was thinking about. regards -morten-

hi, does anybody has a drawing with the HP/Torque curves of a land rover 2.5 na diesel? regards -morten-

hi, i have just put in a newly restored 2.5 na diesel. it runs great, have a lot of power, is verry quiet and dont smoke. but, it does not run well under 1100rpm, it misfires and the rpm goes somewhat up and down. it does not always reduses the rpm when i let the trottle up (not the cables, the little rod on the pump is where it should be), i have to put it in gear with handbreak on and slowly lift up the clutch to lower the rpm. it does run on 600rpm when warm, but just barely. it stood for 1-2 years before put in car. the engine has run about 150 miles. where shall i start to look????? regards -morten-

hi, i have just put a 2.5 na diesel in my 1975 series 3 LHD ex-mod petrol 109. if anybody should be interested: how i did it regards -morten-

hi, i am impressed!!!! regards -morten-

hi, that would be great! i would also be interested in buying that valve/bolt/thingy. could buy hole pump, but postage to norway would kill me. i have put the engine in my serie 3 land rover, there might be an article soon. regards -morten-

hi, have found out that it is the latch valve. but i am unsurtain of the plastic nut at the end. it sits loose at on the bolt. it may have been damaged during transportation of engine, as the paint had chipped off at this place, so i would like to know more about what the plastic nut actually do. regards -morten-

hi, have tried to find info on the internet, and forums, but cant find anything. i would like to know what this part is on the distributor pump on a landrover 2.5 na diesel. it is the part in the black circel. the outer nut is made of plastic, and does not sit very firm on the bolt. hope you can help. regards