Jump to content

asalt

Settled In
  • Posts

    46
  • Joined

  • Last visited

Everything posted by asalt

  1. I think the best way to stop the smart people of the community it just to leave it unlocked with the keys in, should really confuse them!
  2. Scream alarms are quite effective http://www.sure24.co.uk/sure-lckap08-padlock-alarm.html
  3. Mine kept emailing me sayin that I reached the limit but it still kept working fine so I just thought it was some sort of scam
  4. I'm with fridge but he forgot the last step about trying to touch up the runs with a brush after having the beer(s) ........ It gives it that lovely artexed look .......Painting never was my strong point
  5. Maybe I'll just do that, was just going to buy the bits and do them myself but that sounds easier Thanks
  6. Hi all Can anyone tell me what diameter pipe I need for my oil cooler and what size the fittings are which come from the filter for a 1994 3.9 efi v belt Cheers Ash
  7. http://www.stakesys.co.uk/department/tube_bender_machines/ this is the place anyway the guy was quite helpful he seemed to be bringing a lot in from the states might be able to get hold of some for you and he's in the uk
  8. Hi si sorry Got confused mine were the dies for the pro tools bender but I used them in my own home made bender don't no whether they will fit yours or not
  9. I went for the bigger radius on my dies for the same reason as si , jus so you can bend thinner walled tube Thought it would be useful for my exhaust as well the place I got mine seen to have every size you can think of Ash
  10. So not much good for 50.2 x 3 mm CDs would the bender you have work with this and what sort of price are they Ash
  11. Say you did have a cheap cr*py one because its all you can afford would this help?
  12. What tube and size are you using ? Have you packed it with sand to stop distorsion just wondering if this really helps? Ash
  13. Done it now was quite easy I brought a x brake in the end and fitted the prop from a disco on the front everything fitted together well cheers for the advice Ash
  14. I'm only 22 tried all of them they don't won't to no ! All I want is the theft bit incase it gets nicked really I dnt no if anyone does just that
  15. Hi everyone I'm building a challenge truck ATM and I'm getting to the point where iv spent quite a bit of money and I'm thinking of. Insuring it iv tried a few companys but they don't want to no as it sorn and is just goin to be trailered so I was wondering if anyone could help with some ideas ? Thanks Ash
  16. Most of the interia has been ripped out so sorting the lever shouldnt be to bad i was mainly wondering about the fitment off the box and the props , prob going to be from 300tdi disco . I'm planning on just using off road for winch calenges so road work isn't to much of a worry just thought with the bigger wheels it might be to fast Sorry about the bad spelling Cheers Ash
  17. hey i was just wondering what would be involved in swapping my borg warner box for a lt230 on my 1994 3.9efi rrc manual im alson planning on fit 35" tyres so would a lower ratio be a good option cheers ash
  18. Thanks for the advice I shall go away and see what I can do Cheers Ash
  19. Between the body and chassis would extending the steering shaft reduce the angle
  20. Hi just wondered if any 1 can help me I've body lifted my rrc by 3.5" and I'm having trouble with the steering locking up do I need to extend the steering shaft ? Or have I lifted it to much ? Thanks Ash
  21. thanks for that! it doesnt seem like i can go wrong! cheers for the advise ash
  22. thanks ! i think i no what you mean is it one of the 2 bolts in the side does it matter which one ? ash
  23. hi i was just wondering if any one could tell me where to join my brake servo vacum pipe on to ? any advice or pics would be great thanks!
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy