Francis

My disco's tyres are wearing extremely quickly (within a month, to bald) in the inside 50% on both sides. I have been reading some things about toe-in...also that there is no adjustment for camber. Am I doomed? Is there anything other than the axle that could be bent and need replacing?

I have had exactly the same issue with my 200tdi. My mechanic had to replace the pipework on one side, and he said when he removed the pipes and tubes, dark slime came out, followed by brake fluid... My 200tdi brake calipers are made of alloy, I am sure your's are too. You can buy 'rebuild' kits for brakes, just the pots and the seals, it works out to about 80 quid on ebay for four brakes, then add the time for you to put them back together. If yours are as crappy as mine, your pipes will be rusted/corroded away too! And your rubber hoses might be shot too. My brakes now run ok, but I think there is the same sludge on the other side, because there is slight pull when I brake. It's cheapest to get the refurb kit, and give to a mechanic to do, because brake calipers are expensive!

Hi! I live in Crawley, West Sussex (yeah yeah) and I desperately need a few clutch push rod retaining clips. My Disco is in the garage have the clutch done, but I have no clip right now, and they break easily so he wants a few in case he breaks some trying to clip them in place. Can anyone out there help? My mobile is 07581 566274. Francis.

Thanks. I am going to take a look at it today. I will let you know what the outcome is!

Well. My discovery brakes are causing nightmares. We have had the pads out, lubed the caliper pistons. As I drive along, it's like they are pressurizing but by bit, until the pedal is totally stiff with zero travel. Both side on the front get hot, and lock up. It's a 1993 Discovery. Anyone got any ideas?

Had to post a link to this on here. Wow, what a piece of kit! Would make an excellent expedition vehicle. And http://cgi.ebay.co.uk/LAND-ROVER-AMBULANCE...bayphotohosting

Parts say esr238 on them by the way

I bought an exhaust from ebay, end and middle silencers and pipes. The centre pipe is flanged to accommodate the end pipe but the end pipe does not completely fit into that, and add to that I am now being told that my 1994 200tdi is actually a 300tdi and it's the wrong exhaust.... But there add on ebay says exhaust for 200tdi AND 300tdi??????? So is the exhaust for the 200tdi the same as the 300tdi? Here's the link to the add. http://cgi.ebay.co.uk/LAND-ROVER-DISCOVERY...bayphotohosting The top right corner of the picture, the top pipe in the picture, that bit of pipe does not fit into the bottom pipe pictured, except for maybe 1 inch. I can't see this is right at all? I am being asked to fork out a further 20 quid for a courier to collect and send me out another pipe because I ordered the wrong pipe according to them.... I am not best pleased. I will post pictures of what I mean when I get in at 9pm tonight. Any help would be appreciated. Also, is it a better option to say sod it and have the things welded together and just whack it on anyway?

Hi. About to buy an LPG 3.5V8 Mk1 Disco. Want to know what the MPG is on a 'cost equivalent'? Thanks!

Forget breakers yards. They are all too aware of the value of Defenders. Because they are like mechanno, they just strip them. Even a smashed (and I mean rolled and totalled) Defender goes for 1000's on feebay. http://www.find-a-part.com/ http://www.breakeryard.com/ I used the first one ( I think ) and had prices ranging from more than I would pay at Halfords to really cheap! You get called by loads of breakers yards with their price on the part you are after if they have it.

http://cgi.ebay.co.uk/1991-LAND-ROVER-110-...id=p3286.c0.m14

Well, in a roundabout way, I reckon my posting on the tonka toy saved your bacon then! :)

http://cgi.ebay.co.uk/2006-LAND-ROVER-90-D...id=p3286.c0.m14

I am posting this in this section, as I want some good ideas on mods, and I would imagine the Series section is more for people who want to maintain their Series vehicle, not cut it to bits. I have outside my front door, a Disco Mk1 V8 that I cannot sell! I want to know how hard it would be to either A) take my Series 3 FFR 109 with hoops and canvass (I love it!) and transplant it onto the v8 disco chassis, so I have the look and utilitity of my soon to be defender pretender, and the power and handling of a V8 disco? Or B) take the full running gear including engine and auto box and put it onto the Series chassis. I prefer to do the former, as the latter will leave me with leaf springs and I want to eventually have dislocating springs. Can this be done? I would then of course, put an LPG kit on it. And lastly are there any good places to go to have this done if it is possible?

The short rubber hose (about 4 inches or so long) that petrol runs through to the engine has perished. It is held on with two screw up clips. My question is where to get a replacement? Any help? Thanks!